A thread that invokes {{wait()}} expects to wake up and resume execution when its [condition predicate|BB. Definitions#condition predicate] becomes true. Waiting threads must test their condition predicates upon receiving notifications and resume waiting if the predicates are false, to be compliant with [THI03-J. Always invoke wait() and await() methods inside a loop|THI03-J. Always invoke wait() and await() methods inside a loop].
The {{notify()}} and {{notifyAll()}} methods of package {{java.lang.Object}} are used to wake up waiting thread(s). These methods must be invoked from code that holds the same object lock as the waiting thread(s). An {{IllegalMonitorStateException}} is thrown if the current thread does not acquire this object's intrinsic lock before invoking these methods. The {{notifyAll()}} method wakes up all threads and allows threads whose condition predicate is true to resume execution. Furthermore, if all the threads whose condition predicate evaluates to true previously held a specific lock before going into the wait state, only one of them will reacquire the lock upon being notified. Presumably, the other threads will resume waiting. The {{notify()}} method wakes up only one thread and makes no guarantees as to which thread is notified. If the thread's condition predicate doesn't allow the thread to proceed, the chosen thread may resume waiting, defeating the purpose of the notification.
The {{notify()}} method may only be invoked if all of the following conditions are met:
* The condition predicate is identical for each waiting thread.
* All threads must perform the same set of operations after waking up. This means that any one thread can be selected to wake up and resume for a single invocation of {{notify()}}.
* Only one thread is required to wake upon the notification.
These conditions are satisfied by threads that are identical and provide a stateless service or utility.
The {{java.util.concurrent}} utilities (interface {{Condition}}) provide the {{signal()}} and {{signalAll()}} methods to awaken threads that are blocked on an {{await()}} call. {{Condition}} objects are required when using {{Lock}} objects. A {{Lock}} object allows the use of {{wait()}} and {{notify()}} methods. However, code that synchronizes using a {{Lock}} object does not use its own intrinsic lock. Instead, one or more {{Condition}} objects are associated with the {{Lock}} object. These objects interact directly with the locking policy enforced by the {{Lock}} object. Consequently, the {{Condition.await()}}, {{Condition.signal()}} and {{Condition.signalAll()}} methods are used instead of {{Object.wait()}}, {{Object.notify()}} and {{Object.notifyAll()}}.
The use of {{signal()}} is insecure when multiple threads await the same {{Condition}} object unless the following conditions are met:
* The {{Condition}} object is identical for each waiting thread.
* All threads must perform the same set of operations after waking up. This means that any one thread can be selected to wake up and resume for a single invocation of {{signal()}}.
* Only one thread is required to wake upon receiving the signal.
The {{signal()}} method may also be invoked when:
* Each thread uses a unique {{Condition}} object.
* Each {{Condition}} object is associated with a common {{Lock}} object.
The {{signal()}} method, if used securely, has better performance than {{signalAll()}}.
h2. Noncompliant Code Example ({{notify()}})
This noncompliant code example shows a complex multi-step process being undertaken by several threads. Each thread executes one step of the process; the step being performed is indicated by the {{time}} field. Each thread waits for the {{time}} field to indicate that it is time to perform the corresponding thread's step. After performing the step, each thread increments {{time}} to transfer control to the next thread. Next, the thread notifies the thread that is responsible for the next step and then exits.
{code:bgColor=#FFcccc}
public final class ProcessStep implements Runnable {
private static final Object lock = new Object();
private static int time = 0;
private final int step; // Do operations when field time reaches this value
public ProcessStep(int step) {
this.step = step;
}
@Override public void run() {
try {
synchronized (lock) {
while (time != step) {
lock.wait();
}
// Perform operations
time++;
lock.notify();
}
} catch (InterruptedException ie) {
Thread.currentThread().interrupt(); // Reset interrupted status
}
}
public static void main(String[] args) {
for (int i = 4; i >= 0; i--) {
new Thread(new ProcessStep(i)).start();
}
}
}
{code}
This noncompliant code example violates the [liveness|BB. Definitions#liveness] property. Each thread has a different condition predicate, as each requires {{step}} to have a different value before proceeding. The {{Object.notify()}} method wakes up only one thread at a time. Unless it happens to wake up the thread that is required to perform the next step, the program will deadlock.
h2. Compliant Solution ({{notifyAll()}})
In this compliant solution, each thread completes its step and then calls {{notifyAll()}} to notify the waiting threads. The thread that is ready can then perform its task, while all the threads whose condition predicates are false (loop condition expression is true) promptly resume waiting.
Only the {{run()}} method from the noncompliant code example is modified, as follows:
{code:bgColor=#ccccff}
@Override public void run() {
try {
synchronized (lock) {
while (time != step) {
lock.wait();
}
// Perform operations
time++;
lock.notifyAll(); // Use notifyAll() instead of notify()
}
} catch (InterruptedException ie) {
Thread.currentThread().interrupt(); // Reset interrupted status
}
}
{code}
h2. Noncompliant Code Example ({{Condition}} interface)
This noncompliant code example is similar to the noncompliant code example for {{notify()}} but uses the {{Condition}} interface for waiting and notification.
{code:bgColor=#FFcccc}
public class ProcessStep implements Runnable {
private static final Lock lock = new ReentrantLock();
private static final Condition condition = lock.newCondition();
private static int time = 0;
private final int step; // Do operations when field time reaches this value
public ProcessStep(int step) {
this.step = step;
}
@Override public void run() {
lock.lock();
try {
while (time != step) {
condition.await();
}
// Perform operations
time++;
condition.signal();
} catch (InterruptedException ie) {
Thread.currentThread().interrupt(); // Reset interrupted status
} finally {
lock.unlock();
}
}
public static void main(String[] args) {
for (int i = 4; i >= 0; i--) {
new Thread(new ProcessStep(i)).start();
}
}
}
{code}
As with {{Object.notify()}}, the {{signal()}} method may awaken an arbitrary thread.
h2. Compliant Solution ({{signalAll()}})
This compliant solution uses the {{signalAll()}} method to notify all waiting threads. Before {{await()}} returns, the current thread reacquires the lock associated with this condition. When the thread returns it is guaranteed to hold this lock \[[API 06|AA. Java References#API 06]\] {mc} what is meant by "the thread returns?". I think it should be "when the thread wakes up/resumes" {mc}. The thread that is ready can perform its task, while all the threads whose condition predicates are false resume waiting.
Only the {{run()}} method from the noncompliant code example is modified, as follows:
{code:bgColor=#ccccff}
@Override public void run() {
lock.lock();
try {
while (time != step) {
condition.await();
}
// Perform operations
time++;
condition.signalAll();
} catch (InterruptedException ie) {
Thread.currentThread().interrupt(); // Reset interrupted status
} finally {
lock.unlock();
}
}
{code}
h2. Compliant Solution (Unique Condition Per Thread)
This compliant solution assigns each thread its own condition. All the {{Condition}} objects are accessible to all the threads.
{code:bgColor=#ccccff}
// Declare class as final because its constructor throws an exception
public final class ProcessStep implements Runnable {
private static final Lock lock = new ReentrantLock();
private static int time = 0;
private final int step; // Do operations when field time reaches this value
private static final int MAX_STEPS = 5;
private static final Condition[] conditions = new Condition[MAX_STEPS];
public ProcessStep(int step) {
if (step <= MAX_STEPS) {
this.step = step;
conditions[step] = lock.newCondition();
} else {
throw new IllegalArgumentException("Too many threads");
}
}
@Override public void run() {
lock.lock();
try {
while (time != step) {
conditions[step].await();
}
// Perform operations
time++;
if (step + 1 < conditions.length) {
conditions[step + 1].signal();
}
} catch (InterruptedException ie) {
Thread.currentThread().interrupt(); // Reset interrupted status
} finally {
lock.unlock();
}
}
public static void main(String[] args) {
for (int i = MAX_STEPS - 1; i >= 0; i--) {
ProcessStep ps = new ProcessStep(i);
new Thread(ps).start();
}
}
}
{code}
Even though {{signal()}} is used, only the thread whose condition predicate corresponds to the unique {{Condition}} variable will awaken. All threads perform the same set of operations upon waking up.
This compliant solution is safe only if untrusted code cannot create a thread with an instance of this class.
h2. Risk Assessment
Notifying a single thread instead of all waiting threads can pose a threat to the liveness property of the system.
|| Rule || Severity || Likelihood || Remediation Cost || Priority || Level ||
| CON23\- J | low | unlikely | medium | {color:green}{*}P2{*}{color} | {color:green}{*}L3{*}{color} |
h3. Automated Detection
TODO
h3. Related Vulnerabilities
Search for vulnerabilities resulting from the violation of this rule on the [CERT website|https://www.kb.cert.org/vulnotes/bymetric?searchview&query=FIELD+KEYWORDS+contains+CON32-J].
h2. References
\[[API 06|AA. Java References#API 06]\] {{java.util.concurrent.locks.Condition}} interface
\[[JLS 05|AA. Java References#JLS 05]\] [Chapter 17, Threads and Locks|http://java.sun.com/docs/books/jls/third_edition/html/memory.html]
\[[Goetz 06|AA. Java References#Goetz 06]\] Section 14.2.4, Notification
\[[Bloch 01|AA. Java References#Bloch 01]\] Item 50: Never invoke wait outside a loop
----
[!The CERT Sun Microsystems Secure Coding Standard for Java^button_arrow_left.png!|THI03-J. Always invoke wait() and await() methods inside a loop] [!The CERT Sun Microsystems Secure Coding Standard for Java^button_arrow_up.png!|11. Concurrency (CON)] [!The CERT Sun Microsystems Secure Coding Standard for Java^button_arrow_right.png!|CON24THI05-J. Do not use Thread.stop() to terminate threads] | 