Page History

Errors during floating-point operation operations are often ignored by the applications; instead much effort is only in validating the neglected by programmers who instead focus on validating operands before an operation.. Errors that occur during floating-point operations are admittedly difficult to determine and diagnose, but the benefits of doing so often outweigh the costs. This recommendation suggests ways to capture errors during floating-point operations. What makes it difficult to detect these errors is that the application will not abort or even complain when these exceptions occur. For example, while the following statement

The following code exhibits undefined behavior:

int j = 0;
int iResult = 1 / j;

readily generates a runtime error / exception , whereasOn most implementations, integer division by zero is a terminal error, commonly printing a diagnostic message and aborting the program:

double x = 0.0;
double dResult = 1 / x;

generates no error messages.

Though the floating point exception conditions and handling is standardized by IEEE \[1\], the Operating Systems implement support for handling floating point errors and other conditions in different ways.

Non-Compliant Code Example

Floating-point division by zero also results in undefined behavior, although most implementations do not treat it as a terminal error. If additional precautions are not taken, it results in a silent error.

The most portable way to determine if a floating-point exceptional condition has occurred is to use the floating-point exception facilities provided by C in fenv.h.

However, the C floating-point exception functions are not without problems. The following caveats exist regarding the interaction between floating-point exceptions and conversions:

• Conversion from floating-point to integer may cause an "invalid" floating-point exception. If this occurs, the value of that integer is undefined and should not be used.
• Most implementations fail to raise "invalid" for conversions from any negative or "large" positive floating-point values to unsigned integer types or to signed char. (See tflt2int.c.)
• When a noninteger floating-point value is converted to an integer, the "inexact" floating-point exception is raised.

For information regarding floating-point number conversions, see FLP34-C. Ensure that floating-point conversions are within range of the new type.

The C Standard does not require all implementations to support floating-point exceptions. Each exception macro in fenv.h is defined if, and only if, the corresponding exception is supported. Only implementations that use IEC 60559 (formerly IEEE-754) floating-point arithmetic are required to support all five exceptions defined by C (see the C Standard, subclause 7.6.2 [ISO/IEC 9899:2011]). Nevertheless, these functions are the most portable solution for handling floating-point exceptions.

A less portable but potentially more secure solution is to use the capabilities provided by the underlying implementation. If this approach is taken, the caveats of that system must be well understood. The following table provides a starting point for some common operating systems:

Noncompliant Code Example

In this noncompliant code example, floating-point operations are performed without checking for errors. Note that range checking has been intentionally omitted because the intent is to detect errors following the floating-In this NCCE, floating point operations are carried out and there is no observation for errors during floating point operations. Please note the range check on various operands for the operations has been intentionally ignored, since our intention is capture the errors during a floating point operation.

void 
fpOper_noErrorChecking(void) {
  /* ... */
  double a = 1e-40, b, c = 0.1;
  float x = 0, y;
  /* inexactInexact and underflows */
  y = a;
  /* divide Divide-by -zero operation */
  b = y / x;
  /* inexactInexact (loss of precision) */
  c = sin(30) * a;
  /* ... */
}

However, exceptional conditions (as indicated by the comments) occur that may lead to unexpected arithmetic results.

Compliant Solution (C)

This compliant solution uses C99 standard C Standard functions to handle floating-point errors.:

#include <fenv.h>
#pragma STDC FENV_ACCESS ON

void fpOper_fenv(void) {
  double a = 1e-40, b, c = 0.1;
  float x = 0, y;
  int fpeRaised;
  /* ... */

  feclearexcept(FE_ALL_EXCEPT);
  /* Store a into y is inexact and underflows: */
  y = a;
  fpeRaised = fetestexcept(FE_ALL_EXCEPT);
  /* fpeRaised  has FE_INEXACT and FE_UNDERFLOW */

  feclearexcept(FE_ALL_EXCEPT);

  /* divide Divide-by -zero operation */
  b = y / x;
  fpeRaised = fetestexcept(FE_ALL_EXCEPT);
  /* fpeRaised has FE_DIVBYZERO */

  feclearexcept(FE_ALL_EXCEPT);

  c = sin(30) * a;
  fpeRaised = fetestexcept(FE_ALL_EXCEPT);
  /* fpeRaised has FE_INEXACT */

  feclearexcept(FE_ALL_EXCEPT);
  /* ... */
}

Compliant Solution (Windows)

MS Microsoft Visual Studio 2008 and earlier does versions do not support the C99 C functions to handle floating-point errors. Windows provides an alternative method to get the floating point exception code using _statusfp(), _statusfp2(), and _clearfp().

void 
fpOper_usingStatus(void) {
  /* ... */
  double a = 1e-40, b, c;
  float x = 0, y;
  unsigned int rv = _clearfp() ;

  /* Store into y is inexact and underflows: */
  y = a;
  rv = _clearfp() ;  /* rv has _SW_INEXACT and _SW_UNDERFLOW */

  /* zeroZero-divide */
  b = y / x; rv = _clearfp() ; /* rv has _SW_ZERODIVIDE */

  /* inexactInexact */
  c = sin(30) * a; rv = _clearfp() ; /* rv has _SW_INEXACT */
  /* ... */
}

Compliant Solution (Windows SEH)

MS Microsoft Visual Studio 2008 also uses structured exception handling (SEH) is used to handle for floating-point operation. Using the SEH operations. SEH provides more information about the error and allows the programmer to change the results of the floating-point operation that caused the error condition. Using SEH also provides more information about the error condition.

void 
fp_usingSEH(void) {
  /* ... */
  double a = 1e-40, b, c = 0.1;
  float x = 0, y;
  unsigned int rv ;

  unmask_fpfpsr();

  _try {
    /* Store into y is inexact and underflows: */
    y = a;

    /* divide Divide-by -zero operation */
    b = y / x;

    /* inexactInexact */
    c = sin(30) * a;
  }

  _except (_fpieee_flt ((
             GetExceptionCode(),
             GetExceptionInformation(),
             fpieee_handler)) {
  {
	  printf ("fpieee_handler: EXCEPTION_EXECUTE_HANDLER");
  }

  /* ... */
}

void unmask_fpsr(void) {
  unsigned int u;
  unsigned int control_word;
  _controlfp_s(&control_word, 0, 0);
  u = control_word & ~(_EM_INVALID \
                     | _EM_DENORMAL \
                     | _EM_ZERODIVIDE
                     | _EM_OVERFLOW
                     | _EM_UNDERFLOW
                     | _EM_INEXACT);
  _controlfp_s( &control_word, u, _MCW_EM);
  return ;
}

int fpieee_handler(_FPIEEE_RECORD *ieee) {
  /* ... */

  switch (ieee->RoundingMode) {
    case _FpRoundNearest:
      /* ... */
      break;

      /*
       * Other RMs include _FpRoundMinusInfinity,
       * _FpRoundPlusInfinity, _FpRoundChopped.
       */

      /* ... */
    }

  switch (ieee->Precision) {
    case _FpPrecision24:
      /* ... */
      break;

      /* Other Ps include _FpPrecision53 */
      /* ... */
    }

   switch (ieee->Operation) {
     case _FpCodeAdd:
       /* ... */
       break;

       /* 
        * Other Ops include _FpCodeSubtract, _FpCodeMultiply,
        * _FpCodeDivide, _FpCodeSquareRoot, _FpCodeCompare,
        * _FpCodeConvert, _FpCodeConvertTrunc.
        */
       /* ... */
    }

  /* 
   * processProcess the bitmap ieee->Cause.
 */
  /* processProcess the bitmap ieee->Enable.
 */
  /* processProcess the bitmap ieee->Status.
 */
  /* processProcess the Operand ieee->Operand1, 
   * evaluate format and Value.
 */
  /* processProcess the Operand ieee->Operand2, 
   * evaluate format and Value.
 */
  /* processProcess the Result ieee->Result, 
   * evaluate format and Value.
 */
  /* theThe result should be set according to the operation 
   * specified in ieee->Cause and the result formatformatted as 
   * specified in ieee->Result */.
  /* the Result set is based on the */

  /* ... */
}

Risk Assessment

The Floating point exceptions if they go undetected will cause one or more of these conditions - security vulnerability, Undetected floating-point errors may result in lower program efficiency and generate , inaccurate results, or software vulnerabilities. Most processors stall for a significant duration (sometimes upto a second or even more on 32bit desktop processors) when an operation incur incurs a NaN (not a number) value.

References

\[1\] IEEE standard for binary floating-point arithmetic
[http://ieeexplore.ieee.org/xpl/standardstoc.jsp?isnumber=1316]

\[2\] fenv.h - Floating point environment
[http://www.opengroup.org/onlinepubs/009695399/basedefs/fenv.h.html]

\[3\] MSDN - CRT - fpieee_flt
[http://msdn2.microsoft.com/en-us/library/te2k2f2t(VS.80).aspx]

\[4\] Floating-Point IEEE Filter for Microsoft\* Windows\* 2000 on the Intel® Itanium™ Architecture
[ftp://download.intel.com/software/opensource/libraries/ieee/ieee_filter_windows2000.pdf]

\[5\] Linux Kernel Floating Point Exception Handler Local Denial of Service Vulnerability
[http://www.securityfocus.com/bid/10538/discuss]

\[6\] ARM support for floating-point computations
[http://www.keil.com/support/man/docs/armlib/armlib_bihbjiea.htm]\\

Automated Detection

Related Vulnerabilities

Search for vulnerabilities resulting from the violation of this recommendation on the CERT website.

Related Guidelines

Bibliography

...

Image Added Image Added Image AddedFLP02-A. Understand the caveats of floating point exceptions      05. Floating Point (FLP)       FLP30-C. Do not use floating point variables as loop counters