Page History

Some errors, such as a value out-of-range values, might be the result of erroneous user input. If Interactive programs typically handle such errors by rejecting the input is interactive, the program can prompt the and prompting the user for an acceptable value. With other errors, such as a resource allocation failure, the system may have little choice other than to shutdown.Servers reject invalid user input by indicating an error to the client while at the same time continuing to service other clients' valid requests. All robust programs must be prepared to gracefully handle resource exhaustion, such as low memory or disk space conditions, at a minimum by preventing the loss of user data kept in volatile storage. Interactive programs may give the user the option to save data on an alternative medium, whereas network servers may respond by reducing throughput or otherwise degrading the quality of service. However, when certain kinds of errors are detected, such as irrecoverable logic errors, rather than risk data corruption by continuing to execute in an indeterminate state, the appropriate strategy may be for the system to quickly shut down, allowing the operator to start it afresh in a determinate state.

ISO/IEC TR 24772:2013, Section 6.39, "Termination Strategy [REU]," [ISO/IEC TR 24772:2013], Wiki Markup\[[ISO/IEC PDTR 24772|AA. C References#ISO/IEC PDTR 24772]\] Section 6.47, "REU Termination strategy" says:

When a fault is detected, there are many ways in which a system can react. The quickest and most noticeable way is to fail hard, also known as fail fast or fail stop. The reaction to a detected fault is to immediately halt the system. Alternatively, the reaction to a detected fault could be to fail soft. The system would keep working with the faults present, but the performance of the system would be degraded. Systems used in a high availability environment such as telephone switching centers, e-commerce, etc. or other "always available" applications would likely use a fail soft approach. What is actually done in a fail soft approach can vary depending on whether the system is used for safety-critical or security critical purposes. For fail-safe systems, such as flight controllers, traffic signals, or medical monitoring systems, there would be no effort to meet normal operational requirements, but rather to limit the damage or danger caused by the fault. A system that fails securely, such as cryptologic systems, would maintain maximum security when a fault is detected, possibly through a denial of service.

and also:And

The reaction to a fault in a system can depend on the criticality of the part in which the fault originates. When a program consists of several tasks, the tasks each task may be critical, or not. If a task is critical, it may or may not be restartable by the rest of the program. Ideally, a task which that detects a fault within itself should be able to halt leaving its resources available for use by the rest of the program, halt clearing away its resources, or halt the entire program. The latency of any such communication, task termination and whether other tasks can ignore such a communication, termination signals should be clearly specified. Having inconsistent reactions to a fault, such as the fault reaction to a crypto fault , can potentially be a vulnerability.

C99 provides C provides several options for program termination, including exit(), returning from main(), _Exit(), and abort().

exit()

The C standard Calling exit() causes normal program termination to occur. Other than returning from main(), calling exit() function is typically used the typical way to end a program. It The function takes one argument of type int, which should be either EXIT_SUCCESS or EXIT_FAILURE, indicating normal successful or abnormal unsuccessful termination . Zero is equally portable and well understood. C99, Section 7.20.4.3 says respectively. The value of EXIT_SUCCESS is guaranteed to be 0. The C Standard, subclause 7.22.4.4 [ISO/IEC 9899:2011], says, "If the value of status is zero or EXIT_SUCCESS, an implementation-defined form of the status successful termination is returned." The exit() function never returns.

#include <stdlib.h>
/* ... */

if (/* somethingSomething really bad happened */) {
  exit(EXIT_FAILURE);
}

...

• Flushes unwritten buffered data.
• Closes all open files.
• Removes temporary files.
• Returns an integer exit status to the operating system.

The C standard Standard atexit() function can be used to customize exit() to perform additional actions at program termination.

For example, calling:

atexit(turn_gizmo_off);

registers the turn_gizmo_off() function so that a subsequent call to exit() will invoke turn_gizmo_off() as it terminates the program. According to C99, C requires that atexit() can register up to at least 32 functions.

Functions registered by the atexit() is only function are called by exit() or upon normal completion of main().

Note that the behavior of a program that calls exit() from an atexit handler is undefined. (See undefined behavior 182 in Annex J of the C Standard. See also ENV32-C. All exit handlers must return normally.)

return from main()

Because Returning from main() is defined to have return type int, another valid exit strategy is to simply use a return statement causes normal program termination to occur, which is the preferred way to terminate a program. Evaluating the return statement has the same effect as calling exit() with the same argument.

#include <stdlib.h>
 
int main(int argc, char **argv) {
  /* ... */
  if (/* Something really bad happened */) {
    return statusEXIT_FAILURE;
  }
  /* ... */
  return EXIT_SUCCESS;
}

The C Standard, subclause Wiki Markup\[[ISO/IEC 9899-1999|AA. C References#ISO/IEC 9899-1999]\] C99 Section 5.1.2.2.3 has this to say about returning from {{[ISO/IEC 9899:2011], has this to say about returning from main()}}:

If the return type of the main function is a type compatible with int, a return from the initial call to the main function is equivalent to calling the exit function with the value returned by the main function as its argument; reaching the } that terminates the main function returns a value of 0. If the return type is not compatible with int, the termination status returned to the host environment is unspecified.

Consequently, returning from main() is equivalent to calling exit(). Many compilers implement this behavior with something analogous to:

void _start(void) {
  /* ... */
  exit(main(argc, argv));
}

...

However, making it out of main is conditional on correctly handling all errors in a way that does not force premature termination (see \[[ERR00-A. Adopt and implement a consistent and comprehensive error handling policy]\] and \[[ERR05-A. Application-independent code must provide error detection without dictating error handling]\]).

_Exit()

exiting from main is conditional on correctly handling all errors in a way that does not force premature termination. (See ERR00-C. Adopt and implement a consistent and comprehensive error-handling policy and ERR05-C. Application-independent code should provide error detection without dictating error handling.)

_Exit()

Calling _Exit() causes normal program termination to occur. Like the exit() A more abrupt function, _Exit() also takes one argument of type int and never returns. The standard specifies that However, unlike exit(), whether _Exit() also closes open file descriptors, but does not specify if _Exit() flushes file buffers streams, flushes stream buffers,^[1] or deletes temporary files is implementation-defined. Functions registered by atexit() are not executed.

#include <stdlib.h>
/* ... */

if (/* somethingSomething really bad happened */) {
  _Exit(EXIT_FAILURE);
}

The _exit() function is a synonym an alias for _Exit().

abort()

The quickest and most abrupt way to terminate a program, Calling abort() takes no arguments, and always signifies abnormal causes abnormal program termination to the operating system.occur unless the SIGABRT signal is caught and the signal handler calls exit() or _Exit():

#include <stdlib.h>
/* ... */

if (/* somethingSomething really bad happened */) {
  abort();
}

The abortAs with _Exit() function causes abnormal program termination to occur, unless the signal SIGABRT is caught and the signal handler does not return.Whether , whether open streams with unwritten buffered data are flushed,^[2] open streams are closed, or temporary files are removed is implementation-defined. Functions registered by atexit() are not executed. (See ERR06-C. Understand the termination behavior of assert() and abort().)

Summary

The following table summarizes the exit behavior of the program termination functions.

...

Table legend:

• – Yes. The specified action is performed.
• – No. The specified action is not performed.
• – Implementation-defined. Whether the specified action is performed depends on the implementation.

Noncompliant Code Example

The abort() function should not be called if it is important to perform application-specific cleanup before exiting. In this non-compliant noncompliant code example, abort() is called after data is sent to an open file descriptor. The data may or may not actually get be written to the file.

#include <stdlib.h>
#include <stdio.h>

int write_data(void) {
  const char * filename = "hello.txt";
  FILE *f = fopen(filename, "w");
  if (f == NULL) {
    /* handleHandle error */
  }
  fprintf(f, "Hello, World\n");
  /* ... */
  abort(); /* oopsOops! dataData might not getbe written! */
  /* ... */
  return 0;
}

int main(void) {
  write_data();
  return 0EXIT_SUCCESS;
}

Compliant Solution

In this compliant solution, the call to abort() is replaced with exit(), which guarantees that buffered I/O data is flushed to the file descriptor and the file descriptor is properly closed.:

#include <stdlib.h>
#include <stdio.h>

int write_data(void) {
  const char * filename = "hello.txt";
  FILE *f = fopen(filename, "w");
  if (f == NULL) {
    /* handleHandle error */
  }
  fprintf(f, "Hello, World\n");
  /* ... */
  exit(EXIT_FAILURE); /* writesWrites data &and closes f. */
  /* ... */
  return 0;
}

int main(void) {
  write_data();
  return 0EXIT_SUCCESS;
}

While Although this particular example benefits from calling exit() over abort(), there will be situations where  in some situations, abort() is the better choice. Usually this will occur if one , abort() is preferable when a programmer does not want need to close any file descriptors or call any handlers registered with atexit(), for instance, if the speed of terminating the program is critical.

For more details on proper usage of abort(), see ERR06-C. Understand the termination behavior of assert() and abort().

Risk

...

Assessment

As an example, using An usage of abort() or _Exit() in place of exit() may leave written files written in an inconsistent state . It and may also leave sensitive temporary files on the filesystemfile system.

Automated Detection

Related Vulnerabilities

Search for vulnerabilities resulting from the violation of this rule on the CERT website.

References

...

Related Guidelines

Bibliography

...

...

...

...

...

...

...

Image Added Image Added Image Added the environment" \[[ISO/IEC PDTR 24772|AA. C References#ISO/IEC PDTR 24772]\] "REU Termination strategy"ERR03-A. Use runtime-constraint handlers when calling functions defined by TR24731-1      12. Error Handling (ERR)       ERR05-A. Application-independent code must provide error detection without dictating error handling