Page History

The setjmp() macro should only be invoked from only one of the contexts listed in §7subclause 7.13.1.1 of of the C Standard [ISO/IEC 9899:19992011]. Invoking setjmp() outside of one of these contexts results in undefined behavior. (See Undefined Behavior 119 undefined behavior 125.)

After invoking longjmp(), non-volatile-qualified local objects should not be accessed if their values could have changed since the invocation of setjmp(). Their value in this case is considered indeterminate, and accessing them is undefined behavior. (See Undefined Behavior 121, undefined behaviors 127 and 10.)

The longjmp() function should never be used to return control to a function that has terminated execution. (See Undefined Behavior 120 undefined behavior 126.)

Signal masks, floating-point status flags, and the state of open files are not saved by the setjmp() function. If signal masks need to be saved, the POSIX sigsetjmp() function should be used.

This recommendation is related to rules SIG32SIG30-C. Do not call longjmp() from inside a signal handler and Call only asynchronous-safe functions within signal handlers and ENV32-C. All atexit exit handlers must return normally.

Noncompliant Code Example

This noncompliant code example calls setjmp() in an assignment statement, resulting in undefined behavior.:

jmp_buf buf;

void f(void) {
  int i = setjmp(buf);
  if (i == 0) {
    g();
  } else {
    /* longjmp was invoked */
  }
}

void g(void) {
  /* ... */
  longjmp(buf, 1);
}

...

Placing the call to setjmp() in the if statement and, optionally, comparing it with a constant integer removes the undefined behavior, as shown in this compliant solution.:

jmp_buf buf;

void f(void) {
  if (setjmp(buf) == 0) {
    g();
  } else {
    /* longjmp was invoked */
  }
}

void g(void) {
  /* ... */
  longjmp(buf, 1);
}

...

Any attempt to invoke the longjmp() function to transfer control to a function that has completed execution results in undefined behavior.:

jmp_buf buf;
unsigned char b[] = {0xe5, 0x06, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00};

int main(void) {
  setup();
  do_stuff();
  return 0;
}

void setup(void) {
  f();
}

void f(void) {
  g();
}

#include <setjmp.h>
#include <stdio.h>
#include <stdlib.h>

static jmp_buf buf;
static void bad(void);

static void g(void) {
  if (setjmp(buf) == 0) {
    printf("setjmp() invoked\n");
  } else {
    printf("longjmp() invoked\n");
  }
}

static void do_stufff(void) {
  char a[8];
  memcpy(a, b, 8);
  /* ... stuffg();
}

static void setup(void) {
  f();
}

void do_stuff(void) {
  void (*b)(void) = bad;
  /* ... */
  longjmp(buf, 1);
}

static void bad(void) {
  printf("Should not be called!\n");
  exit(1);
}

int main(void) {
  setup();
  do_stuff();
}

Implementation Details

When compiled for x86-64 Compiled at -O0 using GCC v4.1.2 on Linux, the above 7.5 or Clang 8.0 on Ubuntu 18.04 (Linux for x86-64), the preceding example outputs the following when run:

setjmp() invoked
longjmp() invoked
Should not be called!

Because g() has finished executing at the time longjmp() is called, it is no longer on the stack. When do_stuff() is invoked, its stackframe stack frame occupies the same memory as the old stackframe stack frame of g(). In this case, a was located in the same location as the return address of function g(). The call to memcpy() assignment of b overwrites the return address, so , when longjmp() sends control back to function g(), the function returns to the wrong address (in this case, to function bad()).

If the array b were user - specified, the user would be able to set the return address of function g() to any location.

...

The longjmp() function should only be used when only when the function containing the corresponding setjmp() is guaranteed not to have completed execution, as in the following example:

#include <setjmp.h>
#include <stdio.h>
#include <stdlib.h>

static jmp_buf buf;
unsignedstatic char b[] = {0xe5, 0x06, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00}void bad(void);

intvoid maindo_stuff(void) {
  ifvoid (setjmp*b)(bufvoid) == 0) {
    printf("setjmp() invoked\n");
  } else bad;
  /* ... */
  longjmp(buf, 1);
}

static void bad(void) {
    printf("longjmp() invokedShould not be called!\n");
  }
  do_stuff(exit(1);
  return 0;
}

voidint do_stuffmain(void) {
  char a[8];
  memcpy(a, b, 8);
  /* ... stuff ... */
  longjmp(buf, 1);
}

void bad(void)if (setjmp(buf) == 0) {
    printf("setjmp() invoked\n");
  } else {
    printf("Should not be called!longjmp() invoked\n");
  exit(1}
  do_stuff();
}
 

There is no risk of overwriting a return address because the stack frame of main() (the function that invoked setjmp()) is still on the stack; so when do_stuff() is invoked, the two stack frames will not overlap.

...

In this noncompliant example, non-volatile-qualified objects local to the function that invoked the corresponding setjmp() have indeterminate values after longjmp() has been is executed if their value has been changed since the invocation of setjmp().:

jmp_buf buf;

void f(void) {
  int i = 0;
  if (setjmp(buf) != 0) {
    printf("%i\n", i);
    /* ... */
  }
  i = 2;
  g();
}

void g(void) {
  /* ... */
  longjmp(buf, 1);
}

Implementation Details

Calling f() will print 2 if you compile with -O0, but will print 0 if you compile with -O2.  This involves using GCC 7.5 or Clang 8.0 on Ubuntu 18.04 (Linux x86-64).

Compliant Solution

If an object local to the function that invoked setjmp() needs to be accessed after longjmp() returns control to the function, the object should be volatile-qualified.:

jmp_buf buf;

void f(void) {
  volatile int i = 0;
  if (setjmp(buf) != 0) {
    printf("%i\n", i);
    /* ... */
  }
  i = 2;
  g();
}

void g(void) {
  /* ... */
  longjmp(buf, 1);
}

This will now correctly print 2 regardless of optimization level.

Risk Assessment

Related Guidelines

ISO/IEC 9899:1999 Section 7.13, "Nonlocal jumps <setjmp.h>", Section J.2, "Portability issues"

...

Automated Detection

...

Image Modified Image Modified Image Modified