Page History

Secure systems are A secure system is invariably subject to stresses, such as those caused by attack, erroneous or malicious inputs, hardware or software faults, unanticipated user behavior, or and unexpected environmental changes ) that are outside the bounds of "normal operation,." and yet Yet the system must continue to deliver essential services in a timely manner, safely and securely. To accomplish this, a the system must exhibit system qualities such as robustness, reliability, error tolerance, fault tolerance, performance, and security. All of these system-quality attributes depend upon a on consistent and comprehensive error - handling that supports the goals of the overall system.

According ISO/IEC PDTR TR 24772 Section , section 6.47, "REU Termination strategy" .39.1 [ISO/IEC TR 24772], says:

Expectations that a system will be dependable are based on the confidence that the system will operate as expected and not fail in normal use. The dependability of a system and its fault tolerance can be measured through the component part's reliability, availability, safety and security. Reliability is the ability of a system or component to perform its required functions under stated conditions for a specified period of time [IEEE 1990 glossary]. Availability is how timely and reliable the system is to its intended users. Both of these factors matter highly in systems used for safety and security. In spite of the best intentions, systems will may encounter a failure, either from internally poorly written software or external forces such as power outages/variations, floods, or other natural disasters. The reaction to a fault can affect the performance of a system and in particular, the safety and security of the system and its users.

Effective error - handling (which includes error reporting, report aggregation, analysis, response, and recovery) is a central aspect of the design, implementation, maintenance, and operation of systems that exhibit survivability under stress. Survivability is the capability of a system to fulfill its mission, in a timely manner, despite an attack, accident, or other stress that is outside the bounds of normal operation 1[Lipson 2000]. If full services can't services cannot be maintained under a given stress, survivable systems degrade gracefully, continue to deliver essential services, and recover full services as conditions permit.

Error reporting and error handling play a central role in the engineering and operation of survivable systems. Survivability is an emergent property of a system as a whole 2 [Fisher 1999] and depends on the behavior of all of the system's components and the interactions among them. From the viewpoint of error handling, every system component, down to the smallest routine, can be considered to be a sensor capable of reporting on some aspect of the health of the system. Any error (i.e., anomaly) ignored, or anomaly, ignored or improperly handled, could can threaten delivery of essential system services and thus , as a result, put at risk the organizational or business mission that the system supports.

The key characteristics of survivability include the 3Rs3 Rs: resistance, recognition, and recoverrecovery. Resistance refers to measures that "harden" a system against particular stresses, recognition refers to situational awareness with respect to instances of stress and their impact on the system, and recovery is the ability of a system to restore services after (and possibly during) an attack, accident, or other event that has disrupted those services. Comprehensive error reporting and handling can

Recognition of the full nature of adverse events and the determination of appropriate measures for recovery and response are often not possible in the context of the component or routine in which a related error first manifests itself. Aggregation of multiple error reports and the interpretation of those reports in a higher context may be required both to understand what is happening and to decide on the appropriate action to take. Of course, the domain-specific context in which the system operates plays a huge role in determining proper recovery strategies and tactics. For safety-critical systems, simply halting the system (or even just terminating an offending process) in response to an error is rarely the best course of action and may lead to disaster. From a system perspective, error-handling strategies should map directly into survivability strategies, which may include recovery by activating fully redundant backup services , or by providing alternate alternative sets of roughly equivalent services which that fulfill the mission with sufficient diversity to greatly improve the odds of survival against common mode failures.

An error-handling policy must specify a comprehensive approach to error reporting and response. Components and routines should always generate status indicators, and all called routines should have their error returns checked, and all . All input should be checked for compliance with the formal requirements for such input rather than be blindly trusting input datatrusted. Moreover, never assume, based on specific  on the basis of specific knowledge about the system or its domain, that the success of a called routine is guaranteed. The failure to report or properly respond to errors or other anomalies from a system perspective can threaten the survivability of the system as a whole.

ISO/IEC PDTR 24772 Section 6.47, "REU Termination strategy" says:

When a fault is detected, there are many ways in which a system can react. The quickest and most noticeable way is to fail hard, also known as fail fast or fail stop. The reaction to a detected fault is to immediately halt the system. Alternatively, the reaction to a detected fault could be to fail soft. The system would keep working with the faults present, but the performance of the system would be degraded. Systems used in a high availability environment such as telephone switching centers, e-commerce, etc. would likely use a fail soft approach. What is actually done in a fail soft approach can vary depending on whether the system is used for safety critical or security critical purposes. For fail safe systems, such as flight controllers, traffic signals, or medical monitoring systems, there would be no effort to meet normal operational requirements, but rather to limit the damage or danger caused by the fault. A system that fails securely, such as cryptologic systems, would maintain maximum security when a fault is detected, possibly through a denial of service.

ISO/IEC PDTR 24772 Section 6.47, "REU Termination strategy" also says:

The reaction to a fault in a system can depend on the criticality of the part in which the fault originates. When a program consists of several tasks, the tasks each may be critical, or not. If a task is critical, it may or may not be restartable by the rest of the program. Ideally, a task which detects a fault within itself should be able to halt leaving its resources available for use by the rest of the program, halt clearing away its resources, or halt the entire program. The latency of any such communication, and whether other tasks can ignore such a communication, should be clearly specified. Having inconsistent reactions to a fault, such as the fault reaction to a crypto fault, can potentially be a vulnerability.

ISO/IEC PDTR 24772 Section 6.47, "REU Termination strategy" TR 24772:2013, section 6.39.5 [ISO/IEC TR 24772:2013], describes the following mitigation strategies:

Software developers can avoid the vulnerability or mitigate its ill effects in the following ways:

• A strategy for fault handling should be decided. Consistency in fault handling should be the same with respect to critically similar parts.
• A multi-tiered approach of fault prevention, fault detection, and fault reaction should be used.
• System-defined components that assist in uniformity of fault handling should be used when available. For one example, designing a "runtime constraint handler" (as described in ISO/IEC TR 24731-1Annex K of [the C Standard]) permits the application to intercept various erroneous situations and perform one consistent response, such as flushing a previous transaction and re-starting restarting at the next one.
• When there are multiple tasks, a fault-handling policy should be specified whereby a task may
  • halt, and keep its resources available for other tasks (perhaps permitting restarting of the faulting task)
  • halt, and remove its resources (perhaps to allow other tasks to use the resources so freed, or to allow a recreation of the task)
  • halt, and signal the rest of the program to likewise halt.

Risk

...

Assessment

Failure to adopt and implement a consistent and comprehensive error-handling policy is detrimental to system survivability , and can result in a broad range of vulnerabilities depending on the operational characteristics of the system.

Related Vulnerabilities

Search for vulnerabilities resulting from the violation of this rule on the CERT website.

Automated Detection

...

Related Guidelines

Bibliography

...

Image Added Image Added Image Added

References

\[[Horton 90|AA. C References#Horton 90]\] Section 11 p. 168, Section 14 p. 254
\[[ISO/IEC 9899-1999|AA. C References#ISO/IEC 9899-1999]\] Sections 7.1.4, 7.9.10.4, and 7.11.6.2
\[[ISO/IEC PDTR 24772|AA. C References#ISO/IEC PDTR 24772]\] "REU Termination strategy", "NZN Returning error status"
\[[Koenig 89|AA. C References#Koenig 89]\] Section 5.4 p. 73
\[[MISRA 04|AA. C References#MISRA 04]\] Rule 16.1
\[[Summit 05|AA. C References#Summit 05]\] C-FAQ Question 20.4

1 Howard Lipson & David Fisher. "Survivability—A New Technical and Business Perspective on Security," 33-39. Proceedings of the 1999 New Security Paradigms Workshop. Caledon Hills, Ontario, Canada, Sept. 22-24, 1999. New York: Association for Computing Machinery, 2000.
2 David Fisher & Howard Lipson, "Emergent Algorithms - A New Method for Enhancing Survivability in Unbounded Systems," Proceedings of the 32nd Annual Hawaii International Conference on System Sciences (HICSS-32). Maui, HI, January 5-8, 1999.
4 Howard Lipson, Evolutionary Systems Design: Recognizing Changes in Security and Survivability Risks, SEI Technical Note, CMU/SEI-2006-TN-027, September 2006.

13. Error Handling (ERR)      13. Error Handling (ERR)       ERR01-A. Use ferror() rather than errno to check for FILE stream errors