While it used to be common practice to Although programmers often use integers and pointers interchangeably in C (although it was not considered good style), the C99 standard has mandated that pointer-to-integer and integer-to-pointer conversions are implementation defined. This means that they are not necessarily portable from one system to the next, and additionally multiple conversions may or may not give the desired behavior.

Universal Integer/Pointer Storage

It is recommended to use a union if you need to memory to be accessible as both a pointer and an integer rather than make the cast. Since a union is the size of the largest element and will faithfully represent both as the implementation defines, it will ensure the proper behavior and keep data from being lost.

Non-Compliant Code

-defined. 

Conversions between integers and pointers can have undesired consequences depending on the implementation.

According to the C Standard, subclause 6.3.2.3 [ISO/IEC 9899:2024],

An integer may be converted to any pointer type. Except as previously specified, the result is implementation-defined, might not be correctly aligned, might not point to an entity of the referenced type, and might be a trap representation.

Any pointer type may be converted to an integer type. Except as previously specified, the result is implementation-defined. If the result cannot be represented in the integer type, the behavior is undefined. The result need not be in the range of values of any integer type.

Do not convert an integer type to a pointer type if the resulting pointer is incorrectly aligned, does not point to an entity of the referenced type, or is a trap representation.

Do not convert a pointer type to an integer type if the result cannot be represented in the integer type. (See undefined behavior 24.)

The mapping between pointers and integers must be consistent with the addressing structure of the execution environment. Issues may arise, for example, on architectures that have a segmented memory model.

Noncompliant Code Example

The size of a pointer can be greater than the size of an integer, such as in an implementation where pointers are 64 bits and unsigned integers are 32 bits. This code example is noncompliant on such implementations because the result of converting the 64-bit ptr cannot be represented in the 32-bit integer type:

void f(void) {
  char *ptr;
  /* ... */
  

unsigned int *ptr = 0xcfcfcfcf;
...
unsigned int number = (unsigned int)ptr + 1;
unsigned int /*ptr2 = ptr;

...

... */
}

Compliant Solution

Any valid pointer to void can be converted to intptr_t or uintptr_t and back with no change in value. (See INT36-EX2.) The C Standard guarantees that a pointer to void may be converted to or from a pointer to any object type and back again and that the result must compare equal to the original pointer. Consequently, converting directly from a char * pointer to a uintptr_t, as in this compliant solution, is allowed on implementations that support the uintptr_t type.

union intpoint#include <stdint.h>
 
void f(void) {
	unsigned  intchar *pointer;
	unsigned int number;
} intpoint;
...
intpoint mydata = 0xcfcfcfcf;
...
unsigned int num = mydata.number + 1;
unsigned int *ptr = mydata.pointer;

The non-compliant code leads to many possible conversion errors and additionally overflow. All of these are avoided by using a union. 

Accessing Memory-Mapped Addresses*

Note: This is a bad idea. The following is a description of how to properly execute a bad idea.

Often times in low level, kernel, and graphics code you will need to access memory at a specific locations. This means you are going to have to make a literal integer to pointer to conversion! This will make your code non-portable!

The trick here is to convince the compiler you are going to do something bad instead of just assigning a pointer to an integer.

Non-Compliant Code Example

ptr;
  /* ... */
  uintptr_t number = (uintptr_t)ptr;  
  /* ... */
}

Noncompliant Code Example

In this noncompliant code example, the pointer ptr is converted to an integer value. The high-order 9 bits of the number are used to hold a flag value, and the result is converted back into a pointer. This example is noncompliant on an implementation where pointers are 64 bits and unsigned integers are 32 bits because the result of converting the 64-bit ptr cannot be represented in the 32-bit integer type.

void func(unsigned int flag) {
  char *ptr;
  /* ... */
  unsigned int number = (unsigned int)ptr;
  number = (number & 0x7fffff) | (flag << 23);
  ptr = (char *)number;
}

A similar scheme was used in early versions of Emacs, limiting its portability and preventing the ability to edit files larger than 8MB.

Compliant Solution

This compliant solution uses a struct to provide storage for both the pointer and the flag value. This solution is portable to machines of different word sizes, both smaller and larger than 32 bits, working even when pointers cannot be represented in any integer type. 

struct ptrflag {
  char *pointer;
  unsigned int flag : 9;
} ptrflag;
 
void func(unsigned int flag) {
  char *ptr;
  /* ... */
  ptrflag.pointer = ptr;
  ptrflag.flag = flag;
}

Noncompliant Code Example

It is sometimes necessary to access memory at a specific location, requiring a literal integer to pointer conversion. In this noncompliant code, a pointer is set directly to an integer constant, where it is unknown whether the result will be as intended:

unsigned int *g(void) {
  

unsigned int *ptr = 0xcfcfcfcf;
 0xdeadbeef;
  /* ... */
  return ptr;
} 

The result of this assignment is implementation-defined, might not be correctly aligned, might not point to an entity of the referenced type, and might be a trap representationBecause integers are no longer pointers this could have drastic consequences.

Compliant Solution

Unfortunately this code cannot be made safe while strictly conforming to ISO C.

A particular platform (that is, hardware, operating system, compiler, and Standard C library) might guarantee that a memory address is correctly aligned for the pointer type, and actually contains a value for that type. A common practice is to use addresses that are known to point to hardware that provides valid values.

Exceptions

INT36-C-EX1: The integer value 0 can be converted to a pointer; it becomes the null pointer.

INT36-C-EX2: Any valid pointer to void can be converted to intptr_t or uintptr_t or their underlying types and back again with no change in value. Use of underlying types instead of intptr_t or uintptr_t is discouraged, however, because it limits portability.

unsigned int * ptr = (unsigned int *) 0xcfcfcfcf;

#include <assert.h>
#include <stdint.h>
 
void h(void) {
  intptr_t i = (intptr_t)(void *)&i;
  uintptr_t j = (uintptr_t)(void *)&j;
 
  void *ip = (void *)i;
  void *jp = (void *)j;
 
  assert(ip == &i);
  assert(jp == &j);
}

Risk Assessment

Converting from pointer to integer or vice versa results in code that is not portable and may create unexpected pointers to invalid memory locationsThe trick here is you are telling the compiler you really do want to do this bad thing. If on your system pointers are typecast to something other than an unsigned int, then you want to use the type they are defined to be instead of unsigned int.

 Credits:

- I used this little tutorial to help me figure out the particulars of unions, as they are not often used. Read it here

Automated Detection

Related Vulnerabilities

Search for vulnerabilities resulting from the violation of this rule on the CERT website.

Related Guidelines

Key here (explains table format and definitions)

CERT-CWE Mapping Notes

Key here for mapping notes

CWE-758 and INT36-C

Independent( INT34-C, INT36-C, MEM30-C, MSC37-C, FLP32-C, EXP33-C, EXP30-C, ERR34-C, ARR32-C)

CWE-758 = Union( INT36-C, list) where list =

• Undefined behavior that results from anything other than integer <-> pointer conversion

CWE-704 and INT36-C

CWE-704 = Union( INT36-C, list) where list =

• Incorrect (?) typecast that is not between integers and pointers

CWE-587 and INT36-C

Intersection( CWE-587, INT36-C) =

• Setting a pointer to an integer value that is ill-defined (trap representation, improperly aligned, mis-typed, etc)

CWE-587 – INT36-C =

• Setting a pointer to a valid integer value (eg points to an object of the correct t ype)

INT36-C – CWE-587 =

• Illegal pointer-to-integer conversion

Intersection(INT36-C,CWE-466) =  ∅  

Intersection(INT36-C,CWE-466) =  ∅

An example explaining the above two equations follows:

static char x[3];

char* foo() {

  int x_int = (int) x; // x_int = 999 eg

  return x_int + 5; // returns 1004 , violates CWE 466

}

...

int y_int = foo(); // violates CWE-466

char* y = (char*) y_int; //  // well-defined but y may be invalid, violates INT36-C

char c = *y; // indeterminate value, out-of-bounds read, violates CWE-119

Bibliography

...

Image Added Image Added Image Added- Even more of my ideas came from the more recent comp.lang.c FAQ. Read it here