Page History

Reading a shared primitive variable in one thread may not yield the value of the latest most recent write to the variable from another thread. It is important to ensure that a read of a shared variable sees the value Consequently, the thread may observe a stale value of the shared variable. To ensure the visibility of the most recent write to the variable. If this is not done, multiple threads may observe stale values of the shared variable and fail to act accordingly. Visibility of the latest value can be ensured by declaring the variable volatile or correctly synchronizing update, either the variable must be declared volatile or the reads and writes to the variable.must be synchronized.

Declaring a shared variable volatile guarantees visibility in a thread-safe manner only when both of the following conditions are met Wiki MarkupThe use of {{volatile}} is recommended under a very restrictive set of conditions \[[Goetz 06|AA. Java References#Goetz 06]\]:

• A write to a variable does not depend on is independent from its current value.
• The A write is not involved with writes of other variables.
• Only a single thread ever updates the value.
Locking is not required for any other reason
• to a variable is independent from the result of any nonatomic compound operations involving reads and writes of other variables (see VNA02-J. Ensure that compound operations on shared variables are atomic for more information).

The first condition can be relaxed when you can be sure that only one thread will ever update the value of the variable [Goetz 2006]. However, code that relies on a single-thread confinement is error prone and difficult to maintain. This design approach is permitted under this rule but is discouraged.

Synchronizing the code makes it easier to reason about the its behavior of the code and is frequently a more secure approach than simply using the volatile, however, it is slightly more expensive. Excessive use of synchronization can also lead to deadlocks keyword. However, synchronization has somewhat higher performance overhead and can result in thread contention and deadlocks when used excessively.

Declaring a variable as volatile or correctly synchronizing the code guarantees that 64-bit primitive variables of type long and double variables are accessed atomically (see CON25. For more information on sharing those variables among multiple threads, see VNA05-J. Ensure atomicity when reading and writing 64-bit values for information on sharing long and double variables among multiple threads).

Noncompliant Code Example (Non-volatile Flag)

This noncompliant code example uses a shutdown() method to set a non-volatile the nonvolatile done flag that is checked in the run() method. If one thread invokes the shutdown() method to set the flag, it is possible that another thread might not observe this change. Consequently, the second thread may still observe that done is false and incorrectly invoke the sleep() method.:

final class ControlledStop implements Runnable {
  private boolean done = false;
 
  @Override public void run() {
    while (!done) {
      try {
        // ...
        Thread.currentThread().sleep(1000); // Do something
      } catch(InterruptedException ie) { 
        Thread.currentThread().interrupt(); // Reset handleinterrupted exceptionstatus
      } 
    } 	 
  }

  protectedpublic void shutdown() {
    done = true;
  }
}

If one thread invokes the shutdown() method to set the flag, a second thread might not observe that change. Consequently, the second thread might observe that done is still false and incorrectly invoke the sleep() method. Compilers and just-in-time compilers (JITs) are allowed to optimize the code when they determine that the value of done is never modified by the same thread, resulting in an infinite loop.

Compliant Solution (

...

Volatile)

In this compliant solution, the done flag is declared volatile so to ensure that updates writes are visible to other threads.:

final class ControlledStop implements Runnable {
  private volatile boolean done = false;
 
  @Override public void run() {
    while (!done) {
      try {
        // ...
        Thread.currentThread().sleep(1000); // Do something
      } catch(InterruptedException ie) { 
        Thread.currentThread().interrupt(); // handleReset interrupted exceptionstatus
      } 
    } 	 
  }

  protectedpublic void shutdown() {
    done = true;
  }
}

Compliant Solution (AtomicBoolean)

In this compliant solution, the done flag is declared to be of type java.util.concurrent.atomic.AtomicBoolean

...

This compliant solution uses an AtomicBoolean flag to ensure that updates . Atomic types also guarantee that writes are visible to other threads.

final class ControlledStop implements Runnable {
  private final AtomicBoolean done = new AtomicBoolean(false);
 
  @Override public void run() {
    while (!done.get()) {
      try {
        // ...
        Thread.currentThread().sleep(1000); // Do something
      } catch(InterruptedException ie) { 
        Thread.currentThread().interrupt(); // Reset handleinterrupted exceptionstatus
      } 
    } 	 
  }

  protectedpublic void shutdown() {
    done.set(true);
  }
}

Compliant Solution (synchronized)

This compliant solution uses the intrinsic lock of the Class object to ensure that updates are visible to other threads.:

final class ControlledStop implements Runnable {
  private boolean done = false;
 
  @Override public void run() {
    while (!isDone()) {
      try {
        // ...
        Thread.currentThread().sleep(1000); // Do something
      } catch(InterruptedException ie) { 
        Thread.currentThread().interrupt(); // Reset handleinterrupted exceptionstatus
      } 
    } 	 
  }

  protectedpublic synchronized boolean isDone() {
    return done;
  }

  protectedpublic synchronized void shutdown() {
    done = true;
  }
}

While Although this compliant solution is an acceptable compliant solution, it has the following shortcomings as compared to the previously suggested ones:

...

intrinsic locks cause threads to block

...

and may introduce contention. On the other hand, volatile-qualified shared variables do not block. Excessive synchronization can also make the program prone to deadlock

...

.

However, synchronization Synchronization is a more secure alternative in situations where the volatile keyword or an a java.util.concurrent.atomic.Atomic* field is inappropriate, such as if when a variable's new value depends on its old value. Refer to CON01current value (see VNA02-J. Ensure that compound operations on shared variables are atomic for more information).

Compliance with LCK00-J. Use private final lock objects to synchronize classes that may interact with untrusted code can reduce the likelihood of misuse by ensuring that untrusted callers cannot access the lock object.

Exceptions

VNA00-J-EX0: Class objects are created by the virtual machine; their initialization always precedes any subsequent use. Consequently, cross-thread visibility of Class objects is already assured by default.

Risk Assessment

Failing to ensure the visibility of a shared primitive variables on accesses can lead to variable may result in a thread seeing observing a stale values value of the variablesvariable.

Automated Detection

TODO

Related Vulnerabilities

Search for vulnerabilities resulting from the violation Some static analysis tools are capable of detecting violations of this rule on the CERT website.

References

\[[JLS 05|AA. Java References#JLS 05]\] [Chapter 17, Threads and Locks|http://java.sun.com/docs/books/jls/third_edition/html/memory.html], section 17.4.5 Happens-before Order, section 17.4.3 Programs and Program Order, section 17.4.8 Executions and Causality Requirements
\[[Tutorials 08|AA. Java References#Tutorials 08]\] [Java Concurrency Tutorial|http://java.sun.com/docs/books/tutorial/essential/concurrency/index.html]
\[[Lea 00|AA. Java References#Lea 00]\] Sections, 2.2.7 The Java Memory Model, 2.2.5 Deadlock, 2.1.1.1 Objects and locks
\[[Bloch 08|AA. Java References#Bloch 08]\] Item 66: Synchronize access to shared mutable data
\[[Goetz 06|AA. Java References#Goetz 06]\] 3.4.2. "Example: Using Volatile to Publish Immutable Objects"
\[[JPL 06|AA. Java References#JPL 06]\] 14.10.3. "The Happens-Before Relationship"
\[[MITRE 09|AA. Java References#MITRE 09]\] [CWE ID 667|http://cwe.mitre.org/data/definitions/667.html] "Insufficient Locking", [CWE ID 413|http://cwe.mitre.org/data/definitions/413.html] "Insufficient Resource Locking", [CWE ID 366|http://cwe.mitre.org/data/definitions/366.html]  "Race Condition within a Thread", [CWE ID 567|http://cwe.mitre.org/data/definitions/567.html]  "Unsynchronized Access to Shared Data"

.

Related Guidelines

Bibliography

...

Image Added Image Added Image Added11. Concurrency (CON)      11. Concurrency (CON)      CON02-J. Always synchronize on the appropriate object