FLP34-C. Ensure that floating-point conversions are within range of the new type

If a floating-point value is to be converted to a floating-point value of a smaller range and precision or to an integer type, or if an integer type is to be converted to a floating-point type, the value must be representable in the destination type.

The C Standard, 6.3.1.4, paragraph 1 [ISO/IEC 9899:2011], says,

When a finite value of real floating type is converted to an integer type other than _Bool, the fractional part is discarded (i.e., the value is truncated toward zero). If the value of the integral part cannot be represented by the integer type, the behavior is undefined.

Paragraph 2 of the same subclause says,

When a value of integer type is converted to a real floating type, if the value being converted can be represented exactly in the new type, it is unchanged. If the value being converted is in the range of values that can be represented but cannot be represented exactly, the result is either the nearest higher or nearest lower representable value, chosen in an implementation-defined manner. If the value being converted is outside the range of values that can be represented, the behavior is undefined.

And subclause 6.3.1.5, paragraph 1, says,

When a value of real floating type is converted to a real floating type, if the value being converted can be represented exactly in the new type, it is unchanged. If the value being converted is in the range of values that can be represented but cannot be represented exactly, the result is either the nearest higher or nearest lower representable value, chosen in an implementation-defined manner. If the value being converted is outside the range of values that can be represented, the behavior is undefined.

See undefined behaviors 17 and 18.

This rule does not apply to demotions of floating-point types on implementations that support signed infinity, such as IEEE 754, as all values are within range.

Noncompliant Code Example (float to int)

This noncompliant code example leads to undefined behavior if the integral part of f_a cannot be represented as an integer:

void func(float f_a) {
  int i_a;
 
  /* Undefined if the integral part of f_a cannot be represented. */
  i_a = f_a;
}

Compliant Solution (float to int)

This compliant solution tests to ensure that the float value will fit within the int variable before performing the assignment.

#include <float.h>
#include <limits.h>
#include <math.h>
#include <stddef.h>
#include <stdint.h>
 
extern size_t popcount(uintmax_t); /* See INT35-C */
#define PRECISION(umax_value) popcount(umax_value)
 
void func(float f_a) {
  int i_a;
 
  if (isnan(f_a) ||
      PRECISION(INT_MAX) < log2f(fabsf(f_a)) ||
      (f_a != 0.0F && fabsf(f_a) < FLT_MIN)) {
    /* Handle error */
  } else {
    i_a = f_a;
  }
}

Noncompliant Code Example (Narrowing Conversion)

This noncompliant code example attempts to perform conversions that may result in truncating values outside the range of the destination types:

void func(double d_a, long double big_d) {
  double d_b = (float)big_d;
  float f_a = (float)d_a;
  float f_b = (float)big_d;
}

As a result of these conversions, it is possible that d_a is outside the range of values that can be represented by a float or that big_d is outside the range of values that can be represented as either a float or a double. If this is the case, the result is undefined on implementations that do not support Annex F, "IEC 60559 Floating-Point Arithmetic."

Compliant Solution (Narrowing Conversion)

This compliant solution checks whether the values to be stored can be represented in the new type:

#include <float.h>
#include <math.h>
 
void func(double d_a, long double big_d) {
  double d_b;
  float f_a;
  float f_b;

  if (d_a != 0.0 &&
      (isnan(d_a) ||
       isgreater(fabs(d_a), FLT_MAX) ||
       isless(fabs(d_a), FLT_MIN))) {
    /* Handle error */
  } else {
    f_a = (float)d_a;
  }
  if (big_d != 0.0 &&
      (isnan(big_d) ||
       isgreater(fabs(big_d), FLT_MAX) ||
       isless(fabs(big_d), FLT_MIN))) {
    /* Handle error */
  } else {
    f_b = (float)big_d;
  }
  if (big_d != 0.0 &&
      (isnan(big_d) ||
       isgreater(fabs(big_d), DBL_MAX) ||
       isless(fabs(big_d), DBL_MIN))) {
    /* Handle error */
  } else {
    d_b = (double)big_d;
  }  
}

Risk Assessment

Converting a floating-point value to a floating-point value of a smaller range and precision or to an integer type, or converting an integer type to a floating-point type, can result in a value that is not representable in the destination type and is undefined behavior on implementations that do not support Annex F.

Automated Detection

Related Vulnerabilities

Search for vulnerabilities resulting from the violation of this rule on the CERT website.

Related Guidelines

Key here (explains table format and definitions)

CERT-CWE Mapping Notes

Key here for mapping notes

CWE-197 and FLP34-C

Independent( FLP34-C, INT31-C) FIO34-C = Subset( INT31-C)

CWE-197 = Union( FLP34-C, INT31-C)

CWE-195 and FLP34-C

Intersection( CWE-195, FLP34-C) = Ø

Both conditions involve type conversion. However, CWE-195 explicitly focuses on conversions between unsigned vs signed types, whereas FLP34-C focuses on floating-point arithmetic.

CWE-681 and FLP34-C

CWE-681 = Union( FLP34-C, INT31-C)

Bibliography