View Source

Accessing or modifying shared objects in signal handlers can result in race conditions that can leave data in an inconsistent state. The two exceptions (C Standard, 5.1.2.3, paragraph 5) to this rule are the ability to read from and write to lock-free atomic objects and variables of type volatile sig_atomic_t. Accessing any other type of object from a signal handler is undefined behavior. (See undefined behavior 131.)

The need for the volatile keyword is described in DCL22-C. Use volatile for data that cannot be cached.

The type sig_atomic_t is the integer type of an object that can be accessed as an atomic entity even in the presence of asynchronous interrupts. The type of sig_atomic_t is implementation-defined, though it provides some guarantees. Integer values ranging from SIG_ATOMIC_MIN through SIG_ATOMIC_MAX, inclusive, may be safely stored to a variable of the type. In addition, when sig_atomic_t is a signed integer type, SIG_ATOMIC_MIN must be no greater than −127 and SIG_ATOMIC_MAX no less than 127. Otherwise, SIG_ATOMIC_MIN must be 0 and SIG_ATOMIC_MAX must be no less than 255. The macros SIG_ATOMIC_MIN and SIG_ATOMIC_MAX are defined in the header <stdint.h>.

According to the C99 Rationale [C99 Rationale 2003], other than calling a limited, prescribed set of library functions,

the C89 Committee concluded that about the only thing a strictly conforming program can do in a signal handler is to assign a value to a volatile static variable which can be written uninterruptedly and promptly return.

However, this issue was discussed at the April 2008 meeting of ISO/IEC WG14, and it was agreed that there are no known implementations in which it would be an error to read a value from a volatile sig_atomic_t variable, and the original intent of the committee was that both reading and writing variables of volatile sig_atomic_t would be strictly conforming.

The signal handler may also call a handful of functions, including abort(). (See SIG30-C. Call only asynchronous-safe functions within signal handlers for more information.)

Noncompliant Code Example

In this noncompliant code example, err_msg is updated to indicate that the SIGINT signal was delivered. The err_msg variable is a character pointer and not a variable of type volatile sig_atomic_t.

#include <signal.h>
#include <stdlib.h>
#include <string.h>

enum { MAX_MSG_SIZE = 24 };
char *err_msg;

void handler(int signum) {
  strcpy(err_msg, "SIGINT encountered.");
}

int main(void) {
  signal(SIGINT, handler);

  err_msg = (char *)malloc(MAX_MSG_SIZE);
  if (err_msg == NULL) {
    /* Handle error */
  }
  strcpy(err_msg, "No errors yet.");
  /* Main code loop */
  return 0;
}

Compliant Solution (Writing `volatile sig_atomic_t`)

For maximum portability, signal handlers should only unconditionally set a variable of type volatile sig_atomic_t and return, as in this compliant solution:

#include <signal.h>
#include <stdlib.h>
#include <string.h>

enum { MAX_MSG_SIZE = 24 };
volatile sig_atomic_t e_flag = 0;

void handler(int signum) {
  e_flag = 1;
}

int main(void) {
  char *err_msg = (char *)malloc(MAX_MSG_SIZE);
  if (err_msg == NULL) {
    /* Handle error */
  }

  signal(SIGINT, handler);
  strcpy(err_msg, "No errors yet.");
  /* Main code loop */
  if (e_flag) {
    strcpy(err_msg, "SIGINT received.");
  } 
  return 0;
}

Compliant Solution (Lock-Free Atomic Access)

Signal handlers can refer to objects with static or thread storage durations that are lock-free atomic objects, as in this compliant solution:

#include <signal.h>
#include <stdlib.h>
#include <string.h>
#include <stdatomic.h>
 
#ifdef __STDC_NO_ATOMICS__
#error "Atomics are not supported"
#elif ATOMIC_INT_LOCK_FREE == 0
#error "int is never lock-free"
#endif

atomic_int e_flag = ATOMIC_VAR_INIT(0);
 
void handler(int signum) {
  e_flag = 1;
}

int main(void) {
  enum { MAX_MSG_SIZE = 24 };
  char err_msg[MAX_MSG_SIZE];
#if ATOMIC_INT_LOCK_FREE == 1
  if (!atomic_is_lock_free(&e_flag)) {
    return EXIT_FAILURE;
  }
#endif
  if (signal(SIGINT, handler) == SIG_ERR) {
    return EXIT_FAILURE;
  }
  strcpy(err_msg, "No errors yet.");
  /* Main code loop */
  if (e_flag) {
    strcpy(err_msg, "SIGINT received.");
  }
  return EXIT_SUCCESS;
}

Exceptions

SIG31-C-EX1: The C Standard, 7.14.1.1 paragraph 5 [ISO/IEC 9899:2024], makes a special exception for errno when a valid call to the signal() function results in a SIG_ERR return, allowing errno to take an indeterminate value. (See ERR32-C. Do not rely on indeterminate values of errno.)

the signal function with the first argument equal to the signal number corresponding to the signal that caused the invocation of the handler. Furthermore, if such a call to the signal function results in a SIG_ERR return, the object designated by errno has an indeterminate representation.

Risk Assessment

Accessing or modifying shared objects in signal handlers can result in accessing data in an inconsistent state. Michal Zalewski's paper "Delivering Signals for Fun and Profit" [Zalewski 2001] provides some examples of vulnerabilities that can result from violating this and other signal-handling rules.

Rule	Severity	Likelihood	Remediation Cost	Priority	Level
SIG31-C	High	Likely	High	P9	L2

Automated Detection

Tool	Version	Checker	Description
Astrée		signal-handler-shared-access	Partially checked
Axivion Bauhaus Suite		CertC-SIG31
CodeSonar		CONCURRENCY.DATARACE	Data race
Compass/ROSE			Can detect violations of this rule for single-file programs
Cppcheck Premium	24.9.0	premium-cert-sig31-c
Helix QAC		C2029, C2030 C++3854, C++3855
LDRA tool suite		87 D	Fully implemented
Parasoft C/C++test		CERT_C-SIG31-a	Properly define signal handlers
PC-lint Plus		2765	Fully supported
Polyspace Bug Finder		CERT C: Rule SIG31-C	Checks for shared data access within signal handler (rule partially covered)
RuleChecker		signal-handler-shared-access	Partially checked