Page History

TheFlexible C99array standard \[[ISO/IEC 9899:1999|AA. C References#ISO/IEC 9899-1999]\] introduces flexible array members into the language. While flexible array members are a useful addition they should be properly understood and used with care. 

Flexible array members are defined in Section 6.7.2.1, paragraph 16 of the C99 standard as follows,

As a special case, the last element of a structure with more than one named member may have an incomplete array type; this is called a flexible array member. In most situations, the flexible array member is ignored. In particular, the size of the structure is as if the flexible array member were omitted except that it may have more trailing padding than the omission would imply. However, when a . (or ->) operator has a left operand that is (a pointer to) a structure with a flexible array member and the right operand names that member, it behaves as if that member were replaced with the longest array (with the same element type) that would not make the structure larger than the object being accessed; the offset of the array shall remain that of the flexible array member, even if this would differ from that of the replacement array. If this array would have no elements, it behaves as if it had one element but the behavior is undefined if any attempt is made to access that element or to generate a pointer one past it.

The following is an example of a structure that contains a flexible array member,

struct flexArrayStruct {
  int num;
  int data[];
};

This definition means that, when allocating storage space, only the first member, num, is considered. Consequently, the result of accessing the member data of a variable of type struct flexArrayStruct is undefined. To avoid the potential for undefined behavior, structures that contain a flexible array member should always be accessed with a pointer as shown in the following code example.

struct flexArrayStruct *structP;
size_t array_size;
size_t i;

/* Initialize array_size */

/* Space is allocated for the struct */
structP = (struct flexArrayStruct *)
   malloc(sizeof(struct flexArrayStruct) + sizeof(int) * array_size);
if (structP == NULL) {
  /* Handle malloc failure */
}

structP->num = 0;

/*
 * Access data[] as if it had been allocated
 * as data[array_size]
 */
for (i = 0; i < array_size; i++) {
  structP->data[i] = 1;
}

Prior to the introduction of flexible array members in the C99 standard, structures with a one element array as the final member were used to achieve similar functionality. The following code example illustrates how struct flexArrayStruct is declared in this case.

struct flexArrayStruct {
  int num;
  int data[1];
};

The approach to acquiring memory in this case is similar to the C99 approach with the exception that 1 is subtracted from array_size to account for the element present in the structure definition. The problem with using this approach is that the behavior is undefined when accessing other than the first element of data (see Section 6.5.6, Paragraph 8 of the C99 standard). Consequently, the compiler can generate code that does not return the expected value when accessing the second element of data.  Structures with flexible array members can be used to produce code with defined behavior. However, some restrictions apply:

1. The incomplete array type must be the last element within the structure.
2. There cannot be an array of structures that contain flexible array members.
3. Structures that contain a flexible array member cannot be used as a member in the middle of another structure.

members are a special type of array where the last element of a structure with more than one named member has an incomplete array type; that is, the size of the array is not specified explicitly within the structure.  This "struct hack" was widely used in practice and supported by a variety of compilers. Consequently, a variety of different syntaxes have been used for declaring flexible array members.  For C99-compliant implementations, use the syntax guaranteed valid by C99 \[[ISO/IEC 9899:1999|AA. C References#ISO/IEC 9899-1999]\]. Section 6.7.2.1, paragraph 16: "Structure and Union Specifiers", says:

In particular, the size of the structure is as if the flexible array member were omitted except that it may have more trailing padding than the omission would imply

...

.

Noncompliant Code Example

In this noncompliant code, a one element array is used instead of a flexible array memberan array of size 1 is declared, but when the structure itself is instantiated, the size computed for malloc() is modified to account for the actual size of the dynamic array.

struct flexArrayStruct {
  int num;
  int data[1];
};

/* ... */

struct flexArrayStruct *flexStruct;
size_t array_size;
size_t i;

/* Initializeinitialize array_size */

/* Dynamicallyspace allocateis memoryallocated for the structurestruct */
flexStruct
struct flexArrayStruct *structP
  = (struct flexArrayStruct *)
     malloc(sizeof(struct flexArrayStruct)
          + sizeof(int) * (array_size - 1));
if (flexStructstructP == NULL) {
  /* Handle malloc failure */
}
structP->num = 0;

/* Initialize structure */
flexStruct->num = 0;

 access data[] as if it had been allocated
 * as data[array_size] */
for (i = 0; i < array_size; i++) {
  flexStructstructP->data[i] = 01;
}

The problem with this code is that the only member that is guaranteed to be valid, by instrict thisC99 codedefinition, is {{flexStructstructP->data\[0\]}}. UnfortunatelyConsequently, whenfor usingall compilers{{i that do not support> 0}}, the C99results standardof inthe full,assignment or at all, this approach may be the only solution.  Microsoft Visual Studio 2005, for example, does not implement the C99 are undefined.

Implementation Details

The noncompliant example may be the only alternative for compilers that do not yet implement the C99 syntax. Microsoft Visual Studio 2005 does not implement the C99 syntax.

Compliant Solution

This compliant solution uses the C99 flexible array member syntaxto achieve a dynamically sized structure.

struct flexArrayStruct {
  int num;
  int data[];
};

/* ... */

struct flexArrayStruct *flexStruct;
size_t array_size;
size_t i;

/* Initialize array_size */

/* DynamicallySpace allocateis memoryallocated for the structurestruct */
flexStructstruct flexArrayStruct *structP = (struct flexArrayStruct *)
   malloc(sizeof(struct flexArrayStruct) + sizeof(int) * array_size);
if (flexStructstructP == NULL) {
  /* Handle malloc failure */
}

/* Initialize structure */
flexStructstructP->num = 0;

for/* (i = 0; i < array_size; i++) {
  flexStruct->data[i] = 0;
}

...

Access data[] as if 

...

it had been 

...

allocated
 

...

* 

...

as 

...

data

...

[array_size

...

]

...

Noncompliant Code Example (Declaration)

When using structures with a flexible array member you should never directly declare an instance of the structure.  In this noncompliant code, a variable of type struct flexArrayStruct is declared.

struct flexArrayStruct flexStruct;
size_t array_size;
size_t i;

/* Initialize array_size */

/* Initialize structure */
flexStruct.num = 0;

for (i = 0; i < array_size; i++) {
  flexStruct.datastructP->data[i] = 01;
}

TheThis problemcompliant with this code is that the {{flexArrayStruct}} does not actually reserve space for the integer array data - it can't as the size hasn't been specified.  Consequently, while initializing the num member to zero is allowed, attempting to write even one value into data (that is, solution allows the structure to be treated as if it had declared the member {{data\[0\]}}) will likely overwrite memory not owned by the structure.

Compliant Code Example (Declaration)

The solution is

to

struct flexArrayStruct *flexStruct;
size_t array_size;
size_t i;

/* Initialize array_size */

/* Dynamically allocate memory for the structure */
flexStruct = (struct flexArrayStruct *)
   malloc(sizeof(struct flexArrayStruct) + sizeof(int) * array_size);
if (flexStruct == NULL) {
  /* Handle malloc failure */
}

/* Initialize structure */
flexStruct->num = 0;

for (i = 0; i < array_size; i++) {
  flexStruct->data[i] = 0;
}

In this code snippet the resolves the issue by declaring a pointer to {{flexArrayStruct}} and then dynamically allocating memory for the pointer to point to.  In this case it is acceptable to access the elements of the {{data\[\]}} member as described in C99 Section 6.7.2.1, paragraph 16.

Noncompliant Code Example (Copying)

When using structures with a flexible array member you should never directly copy an instance of the structure.  This noncompliant code attempts to replicate a copy of struct flexArrayStruct.

struct flexArrayStruct *flexStructA;
struct flexArrayStruct *flexStructB;
size_t array_size;
size_t i;

/* Initialize array_size */

/* Allocate memory for flexStructA */

/* Allocate memory for flexStructB */

/* Initialize flexStructA */

/* ... */

*flexStructB = *flexStructA;

The problem with this code is that when the structure is copied the size of the flexible array member is not considered and only the first member of the structure, num, is copied.

Compliant Solution (Copying)

This compliant solution uses memcpy() to properly copy the content of flexStructA into flexStructB.

struct flexArrayStruct *flexStructA;
struct flexArrayStruct *flexStructB;
size_t array_size;
size_t i;

/* Initialize array_size */

/* Allocate memory for flexStructA */

/* Allocate memory for flexStructB */

/* Initialize flexStructA */

/* ... */

memcpy(flexStructB, flexStructA, (sizeof(struct flexArrayStruct) + sizeof(int) * array_size));

In this case the copy is explicit and the flexible array member is accounted for and copied as well.

Noncompliant Code Example (Reference)

When using structures with a flexible array member you should never directly pass an instance of the structure in a function call.  In this noncompliant code, the flexible array structure is passed directly to a function which tries to print the array elements.

void print_array(struct flexArrayStruct structP) {
  size_t i;

  printf("Array is: ");
  for (i = 0; i < structP.num; i++) {
    printf("%d", structP.data[i]);
  }
  printf("\n");
}

struct flexArrayStruct *structP;
size_t array_size;
size_t i;

/* initialize array_size */

/* space is allocated for the struct */
structP = (struct flexArrayStruct *)
     malloc(sizeof(struct flexArrayStruct) + sizeof(int) * array_size);
if (structP == NULL) {
  /* Handle malloc failure */
}

structP->num = array_size;

for (i = 0; i < array_size; i++) {
  structP->data[i] = i;
}

print_array(*structP);

The problem with this code is that passing the structure directly to the function actually makes a copy of the structure.  This copied fails for the same reason as the copy example above.

Compliant Solution (Reference)

Never allow a structure with a flexible array member to be passed directly in a function call.  The above code can be fixed by changing the function to accept a pointer to the structure.

void print_array(struct flexArrayStruct *structP) {
  size_t i;

  printf("Array is: ");
  for (i = 0; i < structP->num; i++) {
    printf("%d", structP->data[i]);
  }
  printf("\n");
}

struct flexArrayStruct *structP;
size_t array_size;
size_t i;

/* initialize array_size */

/* space is allocated for the struct */
structP = (struct flexArrayStruct *)
     malloc(sizeof(struct flexArrayStruct) + sizeof(int) * array_size);
if (structP == NULL) {
  /* Handle malloc failure */
}

structP->num = array_size;

for (i = 0; i < array_size; i++) {
  structP->data[i] = i;
}

print_array(structP);

Risk Assessment

 be {{data\[array_size\]}} in a manner that conforms to the C99 standard.

However, some restrictions apply:

1. The incomplete array type must be the last element within the structure.
2. There cannot be an array of structures that contain flexible array members.
3. Structures that contain a flexible array member cannot be used as a member in the middle of another structure.
4. The sizeof operator cannot be applied to a flexible array.

Risk Assessment

Failing to use the correct syntax can result in undefined behavior, although the incorrect syntax will work on most implementationsFailure to use structures with flexible array members correctly can result in undefined behavior.

Automated Detection

Compass/ROSE can detect some violations of this rule.   In particular, it warns if the last element of a struct is an array with a small index (0 or 1).

Related Vulnerabilities

Search for vulnerabilities resulting from the violation of this rule on the CERT website.

References

\[[ISO/IEC 9899:1999|AA. C References#ISO/IEC 9899-1999]\] Section 6.7.2.1, "Structure and union specifiers"
\[[JTC1/SC22/WG14 N791|http://www.open-std.org/jtc1/sc22/wg14/www/docs/n791.htm]\]McCluskey 01|AA. C References#McCluskey 01]\] ;login:, July 2001, Volume 26, Number 4

...

MEM32-C. Detect and handle memory allocation errors      08. Memory Management (MEM)