Non-atomic signed integer overflow is undefined behavior (see undefined behavior 33 in Annex J.2 of C99). This means that implementations have a great deal of latitude in how they deal with signed integer overflow.

Note the exception that according to the C Standard [ISO/IEC 9899:2011], the behavior of arithmetic on atomic signed integer types is defined to use two's complement representation with silent wrap-around on overflow; there are no technically undefined results. However, while defined, these results are unexpected and thus carry similar risks.

An implementation may define the same modulo arithmetic for both unsigned as well as signed integers. On such an implementation, signed integers overflow by wrapping around to zero. An example of such an implementation is GNU GCC invoked with the -fwrapv command line option.

...

The following sections examine specific operations that are susceptible to integer overflow. When operating on small integer types (smaller than int), integer promotions are applied. The usual arithmetic conversions may also be applied to (implicitly) convert operands to equivalent types before arithmetic operations are performed. Make sure you understand integer conversion rules before trying to implement secure arithmetic operations. (See recommendation INT02-C. Understand integer conversion rules.)

Addition

Addition is between two operands of arithmetic type or between a pointer to an object type and an integer type for rules about adding a pointer to an integer. (See rules ARR37-C. Do not add or subtract an integer to a pointer to a non-array object and ARR38-C. Do not add or subtract an integer to a pointer if the resulting value does not refer to a valid array element.) Incrementing is equivalent to adding one.

Noncompliant Code Example

This noncompliant code example may result in a signed integer overflow during the addition of the signed operands si1 and si2. If this behavior is unanticipated, it can lead to an exploitable vulnerability.

int si1, si2, sum;

/* Initialize si1 and si2 */

sum = si1 + si2;

Compliant Solution (Pre-Condition Test, Two's Complement)

This compliant solution performs a pre-condition test of the operands of the addition to ensure no overflow occurs, assuming two's complement representation.

...

This compliant solution works only on architectures that use two's complement representation. While most modern platforms use two's complement representation, it is best not to introduce unnecessary platform dependencies. (See recommendation MSC14-C. Do not introduce unnecessary platform dependencies.) This solution can also be more expensive than a post-condition test, especially on RISC CPUs.

Compliant Solution (General)

This compliant solution tests the suspect addition operation to ensure no overflow occurs regardless of representation.

...

Subtraction

Subtraction is between two operands of arithmetic type, two pointers to qualified or unqualified versions of compatible object types, or between a pointer to an object type and an integer type. See rules ARR36-C. Do not subtract or compare two pointers that do not refer to the same array, ARR37-C. Do not add or subtract an integer to a pointer to a non-array object, and ARR38-C. Do not add or subtract an integer to a pointer if the resulting value does not refer to a valid array element for information about pointer subtraction. Decrementing is equivalent to subtracting one.

Noncompliant Code Example

This noncompliant code example can result in a signed integer overflow during the subtraction of the signed operands si1 and si2. If this behavior is unanticipated, the resulting value may be used to allocate insufficient memory for a subsequent operation or in some other manner that can lead to an exploitable vulnerability.

signed int si1, si2, result;

/* Initialize si1 and si2 */

result = si1 - si2;

Compliant Solution (Two's Complement)

This compliant solution tests the operands of the subtraction to guarantee there is no possibility of signed overflow, presuming two's complement representation.

...

This compliant solution only works on architectures that use two's complement representation. While most modern platforms use two's complement representation, it is best not to introduce unnecessary platform dependencies. (See recommendation MSC14-C. Do not introduce unnecessary platform dependencies.)

Compliant Solution (General)

This compliant solution tests the operands of the subtraction to guarantee there is no possibility of signed overflow, regardless of representation.

...

Multiplication

Multiplication is between two operands of arithmetic type.

Noncompliant Code Example

This noncompliant code example can result in a signed integer overflow during the multiplication of the signed operands si1 and si2. If this behavior is unanticipated, the resulting value may be used to allocate insufficient memory for a subsequent operation or in some other manner that can lead to an exploitable vulnerability.

signed int si1, si2, result;

/* ... */

result = si1 * si2;

Compliant Solution

This compliant solution guarantees there is no possibility of signed overflow on systems where long long is at least twice the size of int.

...

signed int si1, si2, result;

/* Initialize si1 and si2 */

if (si1 > 0){  /* si1 is positive */
  if (si2 > 0) {  /* si1 and si2 are positive */
    if (si1 > (INT_MAX / si2)) {
      /* handle error condition */
    }
  } /* end if si1 and si2 are positive */
  else { /* si1 positive, si2 non-positive */
    if (si2 < (INT_MIN / si1)) {
        /* handle error condition */
    }
  } /* si1 positive, si2 non-positive */
} /* end if si1 is positive */
else { /* si1 is non-positive */
  if (si2 > 0) { /* si1 is non-positive, si2 is positive */
    if (si1 < (INT_MIN / si2)) {
      /* handle error condition */
    }
  } /* end if si1 is non-positive, si2 is positive */
  else { /* si1 and si2 are non-positive */
    if ( (si1 != 0) && (si2 < (INT_MAX / si1))) {
      /* handle error condition */
    }
  } /* end if si1 and si2 are non-positive */
} /* end if si1 is non-positive */

result = si1 * si2;

Division

Division is between two operands of arithmetic type. Overflow can occur during two's-complement signed integer division when the dividend is equal to the minimum (negative) value for the signed integer type and the divisor is equal to — 1. Division operations are also susceptible to divide-by-zero errors. (See rule INT33-C. Ensure that division and modulo operations do not result in divide-by-zero errors.)

Noncompliant Code Example

This noncompliant code example can result in a signed integer overflow during the division of the signed operands sl1 and sl2 or in a divide-by-zero error. The IA-32 architecture, for example, requires that both conditions result in a fault, which can easily result in a denial-of-service attack.

signed long sl1, sl2, result;

/* Initialize sl1 and sl2 */

result = sl1 / sl2;

Compliant Solution

This compliant solution guarantees there is no possibility of signed overflow or divide-by-zero errors.

signed long sl1, sl2, result;

/* Initialize sl1 and sl2 */

if ( (sl2 == 0) || ( (sl1 == LONG_MIN) && (sl2 == -1) ) ) {
  /* handle error condition */
}
else {
  result = sl1 / sl2;
}

Modulo

The modulo operator provides the remainder when two operands of integer type are divided.

Noncompliant Code Example

This noncompliant code example can result in a divide-by-zero error. Furthermore, many hardware platforms implement modulo as part of the division operator, which can overflow. Overflow can occur during a modulo operation when the dividend is equal to the minimum (negative) value for the signed integer type and the divisor is equal to — 1. This occurs in spite of the fact that the result of such a modulo operation should theoretically be 0.

signed long sl1, sl2, result;

result = sl1 % sl2;

Implementation Details

On x86 platforms, the modulo operator for signed ints is implemented by the idiv instruction code, along with the divide operator. Since INT_MIN / -1 overflows, this code will throw a floating-point exception on INT_MIN % -1.

On MSVC++, taking the modulo of INT_MIN by -1 yields the value 0. On gcc/Linux, taking the modulo of INT_MIN by -1 produces a floating-point exception. However, on gcc versions 4.2.4 and newer, with optimization enabled, taking the modulo of INT_MIN by -1 yields the value 0.

Compliant Solution (Overflow Prevention)

This compliant solution tests the modulo operand to guarantee there is no possibility of a divide-by-zero error or an (internal) overflow error.

signed long sl1, sl2, result;

/* Initialize sl1 and sl2 */

if ( (sl2 == 0 ) || ( (sl1 == LONG_MIN) && (sl2 == -1) ) ) {
  /* handle error condition */
}
else {
  result = sl1 % sl2;
}

Compliant Solution (Absolute Value)

This compliant solution is based on the fact that both the division and modulo operators truncate towards zero, as specified in a footnote in paragraph 6.5.5 of the C99 standard. This guarantees that

...

Unary Negation

The unary negation operator takes an operand of arithmetic type. Overflow can occur during two's complement unary negation when the operand is equal to the minimum (negative) value for the signed integer type.

Noncompliant Code Example

This noncompliant code example can result in a signed integer overflow during the unary negation of the signed operand si1.

signed int si1, result;

/* Initialize si1 */

result = -si1;

Compliant Solution

This compliant solution tests the suspect negation operation to guarantee there is no possibility of signed overflow.

...

Left-Shift Operator

The left-shift operator is between two operands of integer type.

Noncompliant Code Example

This noncompliant code example can result in signed integer overflow.

int si1, si2, sresult;

/* Initialize si1 and si2 */

sresult = si1 << si2;

Compliant Solution

This compliant solution eliminates the possibility of overflow resulting from a left-shift operation.

...

This solution is also compliant with rule INT34-C. Do not shift a negative number of bits or more bits than exist in the operand.

Risk Assessment

Integer overflow can lead to buffer overflows and the execution of arbitrary code by an attacker.

Automated Detection

Related Vulnerabilities

Search for vulnerabilities resulting from the violation of this rule on the CERT website.

Related Guidelines

CERT C++ Secure Coding Standard: INT32-CPP. Ensure that operations on signed integers do not result in overflow

...

MITRE CWE: CWE-190, "Integer Overflow (Wrap or Wraparound)"

Bibliography

[Dowd 2006] Chapter 6, "C Language Issues" (Arithmetic Boundary Conditions, pp. 211-223)
[Seacord 2005] Chapter 5, "Integers"
[Viega 2005] Section 5.2.7, "Integer overflow"
[VU#551436]
[Warren 2002] Chapter 2, "Basics"

...