Page History

Computers can represent only represent a finite number of digits. As a result, it It is therefore impossible to precisely represent repeating binary-representation values such as 1/3 or 1/5 with the most common floating-point representation: binary floating point.

Wiki MarkupWhen precise computations are precise computation is necessary, consider use alternative representations that may be able to completely represent values. For example, if you are performing arithmetic on decimal values and need an exact decimal rounding, represent the values in binary-coded decimal instead of using floating point. Another option is decimal floating-point arithmetic as specified by ANSI/IEEE 754-2007. ISO/IEC WG14 has drafted a proposal to add support for decimal floating-point arithmetic to the C language \[[ISO/IEC DTR 24732|AA. C References#ISO/IEC DTR 24732]\].

When precise computation is necessary, carefully and methodically estimate the maximum cumulative error of the computations, regardless of whether decimal or binary is used, to ensure that the resulting error is within tolerances.  Consider using numerical analysis to properly understand the numerical properties of the problem.  A useful introduction can be found in \[[Goldberg 91|AA. C References#Goldberg 91]\].

Non-Compliant Code Example

that can accurately represent the values. For example, if you are performing arithmetic on decimal values and need an exact decimal rounding, represent the values in binary-coded decimal instead of using floating-point values. Another option is decimal floating-point arithmetic, as specified by ANSI/IEEE 754-2007. ISO/IEC WG14 has drafted a proposal to add support for decimal floating-point arithmetic to the C language [ISO/IEC DTR 24732].

When precise computation is necessary, carefully and methodically estimate the maximum cumulative error of the computations, regardless of whether decimal or binary is used, to ensure that the resulting error is within tolerances. Consider using numerical analysis to properly understand the problem. An introduction can be found in David Goldberg's "What Every Computer Scientist Should Know about Floating-Point Arithmetic" [Goldberg 1991].

Noncompliant Code Example

This noncompliant code example takes the mean of 10 identical numbers and This non-compliant code example takes the mean of ten numbers, and then checks to see if the mean matches the first this number. It should , match because the ten 10 numbers are all 10.1. Yet, due to because of the imprecision of floating-point arithmetic, the computed mean does not match the numbersthis number.

#include <stdio.h>

/* Returns the mean value of the array */
float mean(float array[], int size) {
  float total = 0.0;
  intsize_t i;
  for (i = 0; i < size; i++) {
    total += array[i];
    printf("array[%d%zu] = %f and total is %f\n", i, array[i], total);
  }
  if (size != 0)
    return total / size;
  else
    return 0.0;
}

enum { array_size = 10 };
float array_value = 10.1;

int main(void) {
  float array[array_size];
  float avg;
  intsize_t i;
  for (i = 0; i < array_size; i++) {
    array[i] = array_value;
  }

  avg = mean( array, array_size);
  printf("mean is %f\n", avg);
  if (avg == array[0]) {
    printf("array[0] is the mean\n");
  } else {
    printf("array[0] is not the mean\n");
  }
  return 0;
}

On a 64-bit Linux machine using gcc GCC 4.1, this program yields the following output:

array[0] = 10.100000 and total is 10.100000
array[1] = 10.100000 and total is 20.200001
array[2] = 10.100000 and total is 30.300001
array[3] = 10.100000 and total is 40.400002
array[4] = 10.100000 and total is 50.500000
array[5] = 10.100000 and total is 60.599998
array[6] = 10.100000 and total is 70.699997
array[7] = 10.100000 and total is 80.799995
array[8] = 10.100000 and total is 90.899994
array[9] = 10.100000 and total is 100.999992
mean is 10.099999
array[0] is not the mean

Compliant Solution

This The noncompliant code may can be fixed by replacing the floating-point numbers with integers for the internal computationadditions. Floats are used only when printing results and when doing the division to compute the mean.

#include <stdio.h>

/* Returns the mean value of the array */
intfloat mean(int array[], int size) {
  int total = 0.0;
  intsize_t i;
  for (i = 0; i < size; i++) {
    total += array[i];
    printf("array[%d%zu] = %f and total is %f\n", i, array[i] / 100.0, total / 100.0);
  }
  if (size != 0)
    return ((float) total) / size;
  else
    return 0.0;
}

enum {array_size = 10};
int array_value = 1010;

int main(void) {
  int array[array_size];
  intfloat avg;
  intsize_t i;
  for (i = 0; i < array_size; i++) {
    array[i] = array_value;
  }

  avg = mean( array, array_size);
  printf("mean is %f\n", avg / 100.0);
  if (avg == array[0]) {
    printf("array[0] is the mean\n");
  } else {
    printf("array[0] is not the mean\n");
  }
  return 0;
}

On a 64-bit Linux machine using gcc GCC 4.1, this program yields the following expected output:

array[0] = 10.100000 and total is 10.100000
array[1] = 10.100000 and total is 20.200000
array[2] = 10.100000 and total is 30.300000
array[3] = 10.100000 and total is 40.400000
array[4] = 10.100000 and total is 50.500000
array[5] = 10.100000 and total is 60.600000
array[6] = 10.100000 and total is 70.700000
array[7] = 10.100000 and total is 80.800000
array[8] = 10.100000 and total is 90.900000
array[9] = 10.100000 and total is 101.000000
mean is 10.100000
array[0] is the mean

Risk

...

Assessment

Using a representation other than floating point may allow for more precision and accuracy for critical arithmeticaccurate results.

Automated Detection

Checks for floating

Related Vulnerabilities

Search for vulnerabilities resulting from the violation of this rule recommendation on the CERT website.

Related Guidelines

...

Bibliography

...

Image Added Image Added Image Added

References

\[[IEEE 754 2006|AA. C References#IEEE 754 2006]\]
\[[ISO/IEC JTC1/SC22/WG11|AA. C References#ISO/IEC JTC1/SC22/WG11]\]
\[[ISO/IEC PDTR 24772|AA. C References#ISO/IEC PDTR 24772]\] "PLF Floating Point Arithmetic"
\[[ISO/IEC DTR 24732|AA. C References#ISO/IEC DTR 24732]\]
\[[Goldberg 91|AA. C References#Goldberg 91]\]

FLP01-A. Take care in rearranging floating point expressions      05. Floating Point (FLP)       FLP03-A. Detect and handle floating point errors