Page History

Macros are dangerous because their use resembles that of real functions, but they have different semantics. C99 adds inline functions  The inline function-specifier was introduced to the C programming language in the C99 standard. Inline functions should be preferred over macros when they can be used interchangeably. Making a function an inline function suggests that calls to the function be as fast as possible by using, for example, an alternative to the usual function call mechanism, such as inline substitution. (See also guidelines PRE31-C. Avoid side - effects in arguments to unsafe macros, PRE01-C. Use parentheses within macros around parameter names, and PRE02-C. Macro replacement lists should be parenthesized.)

Inline substitution is not textual substitution, nor does it create a new function. For example, the expansion of a macro used within the body of the function uses the definition it had at the point the function body appeared, and not where the function is called; and identifiers refer to the declarations in scope where the body occurs.

Arguably, a decision to inline a function is a low-level optimization detail that the compiler should make without programmer input. The use of inline functions should be evaluated on the basis of (a) how well they are supported by targeted compilers, (b) what (if any) impact they have on the performance characteristics of your system, and (c) portability concerns. Static functions are often as good as inline functions and are supported in C90 (unlike inline functions)C.

Noncompliant Code Example

In this noncompliant code example, the macro CUBE() has undefined behavior when passed an expression that contains side effects.:

#define CUBE(X) ((X) * (X) * (X))
 
/* ... */
void func(void) {
  int i = 2;
  int a = 81 / CUBE(++i);
  /* ... */
}

For this example, the initialization for a expands to

int a = 81 / ((++i) * (++i) * (++i));

which is undefined . (See guideline see EXP30-C. Do not depend on the order of evaluation between sequence points.)for side effects).

Compliant Solution

When the macro definition is replaced by an inline function, the side effect is executed only once before the function is called.:

inline int cube(int i) {
  return i * i * i;
}
 
/* ... */
void func(void) {
  int i = 2;
  int a = 81 / cube(++i);
  /* ... */ 
}

Noncompliant Code Example

...

In this noncompliant code example, the programmer has written a macro called {{EXEC_BUMP()}} to call a specified function and increment a global counter \ [[Dewhurst 2002|AA. Bibliography#Dewhurst 02]\]. When the expansion of a macro is used within the body of a function, as in this example, identifiers refer to the declarations in scope where the body occurs. As a result, when the macro is called in the {{aFunc()}} function, it inadvertently increments a local counter with the same name as the global variable. Note that this example also violates guideline [DCL01-C. Do not reuse variable names in subscopes].

Code Block
bgColor #FFCCCC lang c
size_t count = 0; #define EXEC_BUMP(func) (func(), ++count) void g(void) { printf("Called g, count = %zu.\n", count); } void aFunc(void) { size_t count = 0; while (count++ < 10) { EXEC_BUMP(g); } }

The result is that invoking aFunc() (incorrectly) prints out the following line five times:

Code Block
Called g, count = 0.

Compliant Solution

In this compliant solution, the EXEC_BUMP() macro is replaced by the inline function exec_bump(). Invoking aFunc() now (correctly) prints the value of count ranging from 0 to 9.:

size_t count = 0;

void g(void) {
  printf("Called g, count = %zu.\n", count);
}

typedef void (*exec_func)(void);
inline void exec_bump(exec_func f) {
  f();
  ++count;
}

void aFunc(void) {
  size_t count = 0;
  while (count++ < 10) {
    exec_bump(g);
  }
}

...

Unlike functions, the execution of macros can interleave. Consequently, two macros that are harmless in isolation can cause undefined behavior when combined in the same expression. In this example, F() and G() both increment the global variable operations, which causes problems when the two macros are used together.:

int operations = 0, calls_to_F = 0, calls_to_G = 0;
 
#define F(x) (++operations, ++calls_to_F, 2 * x)
#define G(x) (++operations, ++calls_to_G, x + 1)

/* ... */

void func(int x) {
  int y = F(x) + G(x);

}

The variable operations is both read and modified twice in the same expression, so it can receive the wrong value if, for example, the following ordering occurs:

read operations into register 0
read operations into register 1
increment register 0
increment register 1
store register 0 into operations
store register 1 into operations

This noncompliant code example also violates guideline EXP30-C. Do not depend on the order of evaluation between sequence pointsfor side effects.

Compliant Solution

The execution of functions, including inline functions, cannot be interleaved, so problematic orderings are not possible.:

int operations = 0, calls_to_F = 0, calls_to_G = 0;
 
inline int f(int x) {
   ++operations;
   ++calls_to_fF;
   return 2 * x;
}

inline int g(int x) {
   ++operations;
   ++calls_to_gG;
   return x + 1;
}


/* ... */

 
void func(int x) {
  int y = f(x) + g(x);

}

Platform-Specific Details

Wiki MarkupGNU C (and some other compilers) supported inline functions before they were added to C99 added to the C Standard and, as a result, have significantly different semantics. Richard Kettlewell provides a good explanation of differences between the C99 and GNU C rules \[ [Kettlewell 2003|AA. Bibliography#Kettlewell 03]\].

Exceptions

PRE00-C-EX1: Macros can be used to implement local functions (repetitive blocks of code that have access to automatic variables from the enclosing scope) that cannot be achieved with inline functions.

PRE00-C-EX2: Macros can be used for concatenating tokens or performing stringification. For example,

enum Color { Color_Red, Color_Green, Color_Blue };
static const struct {
  enum Color  color;
  const char *name;
} colors[] = {
#define COLOR(color)   { Color_ ## color, #color }
  COLOR(Red), COLOR(Green), COLOR(Blue)
};

calculates only one of the two expressions depending on the selector's value. See guideline PRE05-C. Understand macro replacement when concatenating tokens or performing stringification for more information.

PRE00-C-EX3: Macros can be used to yield a compile-time constant. This is not always possible using inline functions, as shown by the following example:

#define ADD_M(a, b) ((a) + (b))
static inline int add_f(int a, int b) {
  return a + b;
}

In this example, the ADD_M(3,4) macro invocation yields a constant expression, while but the add_f(3,4) function invocation does not.

PRE00-C-EX4: Macros can be used to implement type-generic functions that cannot be implemented in the C language without the aid of a mechanism such as C++ templates.

An example of the use of function-like macros to create type-generic functions is shown in guideline MEM02-C. Immediately cast the result of a memory allocation function call into a pointer to the allocated type.

Type-generic macros may also be used, for example, to swap two variables of any type, provided they are of the same type.

PRE00-C-EX5: Macro parameters exhibit call-by-name semantics, whereas functions are call by value. Macros must be used in cases where call-by-name semantics are required.

...

Improper use of macros may result in undefined behavior.

Automated Detection

Related Vulnerabilities

Search for vulnerabilities resulting from the violation of this rule on the CERT website.

Related Guidelines

...

...

Bibliography

\[[FSF 2005|AA. Bibliography#FSF 05]\] Section 5.34, "[An Inline Function Is as Fast as a Macro|http://gcc.gnu.org/onlinedocs/gcc/Inline.html]"
\[[Dewhurst 2002|AA. Bibliography#Dewhurst 02]\] Gotcha #26, "#define Pseudofunctions"
\[[ISO/IEC 9899:1999|AA. Bibliography#ISO/IEC 9899-1999]\] Section 6.7.4, "Function specifiers"
\[[ISO/IEC PDTR 24772|AA. Bibliography#ISO/IEC PDTR 24772]\] "NMP Pre-processor Directives"
\[[Kettlewell 2003|AA. Bibliography#Kettlewell 03]\]
\[[MISRA 2004|AA. Bibliography#MISRA 04]\] Rule 19.7
\[[Summit 2005|AA. Bibliography#Summit 05]\] Question 10.4

Bibliography

...

Image Added Image Added 01. Preprocessor (PRE)      01. Preprocessor (PRE)      Image Modified