Wiki MarkupC99 Section The C Standard, 7.12.1 defines two types of errors that relate specifically to math functions in {{math.h}} \[[ISO/IEC 9899:1999|AA. C References#ISO/IEC 9899-1999]\]:[ISO/IEC 9899:2024], defines three types of errors that relate specifically to math functions in <math.h>.  Paragraph 2 states

A a domain error occurs if an input argument is outside the domain over which the mathematical function is defined.a range error

Paragraph 3 states

A pole error (also known as a singularity or infinitary) occurs if the mathematical function has an exact infinite result of the function cannot be represented in an object of the specified type, due to extreme magnitude.

...

as the finite input argument(s) are approached in the limit.

Paragraph 4 states

arange error occurs if and only if the result overflows or underflows

An example of a domain error is the square root of a negative number, such as sqrt(-1.0), which has no meaning in real arithmetic.

...

Contrastingly, 10 raised to the

...

1-millionth power, pow(10., 1e6),

...

 cannot be represented in

...

many floating

...

-point implementations because of the limited range of the type double and consequently constitutes a range error.

...

In both cases, the function will return some value, but the value returned is not the correct result of the computation. An example of a pole error is log(0.0), which results in negative infinity.

Programmers can prevent domain and pole errors by carefully bounds-Domain errors can be prevented by carefully bounds checking the arguments before calling mathematical functions , and taking alternative action if the bounds are violated.

Range errors usually can not cannot be prevented , as they because they are dependent on the implementation of floating-point numbers , as well as the on the function being applied. Instead of preventing range errors, one  programmers should attempt to detect them and take alternative action if a range error occurs.unmigrated-wiki-markup

The following table lists the double forms of standard mathematical functions, along with any checks that should be performed on their be performed to ensure a proper input domain, and indicates if whether they also throw range can also result in range or pole errors, as reported by \[ISO/IEC 9899:1999\]. If a function has a specific domain over which it is defined, one should check its input values, and if a function throws range errors, one should detect if a range error occurs. The standard math functions not on this table, such as {{atan()}} have no domain restrictions and do not throw range by the C Standard. Both float and long double forms of these functions also exist but are omitted from the table for brevity. If a function has a specific domain over which it is defined, the programmer must check its input values. The programmer must also check for range errors where they might occur. The standard math functions not listed in this table, such as fabs(), have no domain restrictions and cannot result in range or pole errors.

Domain and Pole Checking

The most reliable way to handle domain and pole errors is to prevent them by checking arguments beforehand, as in the following templateexemplar:

double safe_sqrt(double x) {
  if (/* arguments will causex < 0) {
    fprintf(stderr, "sqrt requires a domain error */) {
nonnegative argument");
    /* handleHandle domain / pole error */
  }
else {
 return /* perform computation */sqrt (x);
}

Range Checking

Range errors cannot usually be preventedProgrammers usually cannot prevent range errors, so the most reliable way to handle range errors them is to detect when they have occurred and act accordingly.

Wiki MarkupThe exact treatment of error conditions from math functions is quite complicated. C99 Section tedious. The C Standard, 7.12.1 defines the following behavior for floating point overflow \[[ISO/IEC 9899:1999|AA. C References#ISO/IEC 9899-1999]\]paragraph 5 [ISO/IEC 9899:2024], defines the following behavior for floating-point overflow:

A floating result overflows if the magnitude of the mathematical result is finite but so large that the mathematical result cannot be represented without extraordinary roundoff error in an object of the specified typea finite result value with ordinary accuracy would have magnitude (absolute value) too large for the representation with full precision in the specified type. A result that is exactly an infinity does not overflow. If a floating result overflows and default rounding is in effect, or if the mathematical result is an exact infinity from finite arguments (for example log(0.0)), then the function returns the value of the macro HUGE_VAL, HUGE_VALF, or HUGE_VALL according to the return type, with the same sign as the correct value of the function; if the integer expression mathhowever, for the types with reduced-precision representations of numbers beyond the overflow threshold, the function may return a representation of the result with less than full precision for the type. If a floating resultoverflowsanddefaultroundingisineffectandtheintegerexpressionmath_errhandling & MATH_ERRNO is nonzero, then the integer expression errno acquires the value ERANGE; if . If a floating result overflows, and the integer expression math_errhandling & MATH_ERREXCEPT is nonzero, the ''divide-by-zero'' the "overflow" floating-point exception is raised if the mathematical result is an exact infinity and the ''overflow'' floating-point exception is raised otherwise(regardless of whether default rounding is in effect).

It is best preferable not to check for errors by comparing the returned value against HUGE_VAL or 0 for several reasons:

• These are, in general, valid (albeit unlikely) data values.
• Making such tests requires detailed knowledge of the various error returns for each math function.
• There are three different possibilities, -Multiple results aside from HUGE_VAL, and 0 are possible, and HUGE_VAL, and you programmers must know which are possible in each case.
• Different versions of the library have differed varied in their error-return behavior.

It is also difficult to check for math errors using {{errno}} because an implementation might not set it. For real functions, the programmer can tell whether the implementation sets {{errno}} by checking whether {{math_errhandling & MATH_ERRNO}} is nonzero. For complex functions, the C99 Section 7.3.2 simply states "an implementation may set {{errno}} but is not required to" \[[ISO/IEC 9899:1999|AA. C References#ISO/IEC 9899-1999]\].

It can be unreliable to check for math errors using errno because an implementation might not set errno. For real functions, the programmer determines if the implementation sets errno by checking whether math_errhandling & MATH_ERRNO is nonzero. 

The C Standard, 7.3.2, paragraph 1 [ISO/IEC 9899:2024],  states:

 an implementation may set errno but is not required to.

The obsolete System V Interface Definition (SVID3) [UNIX 1992] The System V Interface Definition, Third Edition (SVID3) provides more control over the treatment of errors in the math library. The user programmer can provide define a function named matherr() that is invoked if errors occur in a math function. This function can print diagnostics, terminate the execution, or specify the desired return - value. The matherr() function has not been adopted by C99C or POSIX, so its use it is not generally portable.

The following error-handing template uses C99 standard C Standard functions for floating-point errors when the C99 C macro math_errhandling is defined and indicates that they should be used; otherwise, otherwise it examines errno.:

#include <math.h>
#if defined(math_errhandling) \
  && (math_errhandling & MATH_ERREXCEPT)
#include <fenv.h>
#endif
#include <fenv.h>
#include <errno.h>
 
/* ... */

#if defined(math_errhandling) \
  && (math_errhandling & MATH_ERREXCEPT)
  feclearexcept(/* Use to call a math function and check errors */
{
  #pragma STDC FENV_ACCESS ON

  if (math_errhandling & MATH_ERREXCEPT) {
    feclearexcept(FE_ALL_EXCEPT);
#endif  }
  errno = 0;

  /* callCall the math function */

#if !defined  if ((math_errhandling) \
  || (math_errhandling & & MATH_ERRNO)
if && (errno != 0) {
    /* handleHandle range error */
}
#endif
#if defined(math_errhandling) \
  &&  } else if ((math_errhandling & MATH_ERREXCEPT)
if (fetestexcept(FE_INVALID &&
              fetestexcept(FE_INVALID | FE_DIVBYZERO |
               | FE_OVERFLOW
           FE_OVERFLOW    | FE_UNDERFLOW) != 0) {
    /* handleHandle range error */
  }
#endif}

See FLP03-C. Detect and handle floating-point errors for more details on how to detect floating-point errors. AnchorSqrtSqrt

sqrt(x)

Noncompliant Code Example

The following noncompliant code determines the square root of x

double x;
double result;

result = sqrt(x);

However, this code may produce a domain error if x is negative.

Compliant Solution

Since this function has domain errors but no range errors, one can use bounds checking to prevent domain errors.

double x;
double result;

if (isless(x, 0)) {
  /* handle domain error */
}

result = sqrt(x);

...

Subnormal Numbers

A subnormal number is a nonzero number that does not use all of its precision bits [IEEE 754 2006]. These numbers can be used to represent values that are closer to 0 than the smallest normal number (one that uses all of its precision bits). However, the asin(), asinh(), atan(), atanh(), and erf() functions may produce range errors, specifically when passed a subnormal number. When evaluated with a subnormal number, these functions can produce an inexact, subnormal value, which is an underflow error.

The C Standard, 7.12.1, paragraph 6 [ISO/IEC 9899:2024], defines the following behavior for floating-point underflow:

The result underflows if a nonzero result value with ordinary accuracy would have magnitude (absolute value) less than the minimum normalized number in the type; however a zero result that is specified to be an exact zero does not underflow. Also, a result with ordinary accuracy and the magnitude of the minimum normalized number may underflow.269) If the result underflows, the function returns an implementation-defined value whose magnitude is no greater than the smallest normalized positive number in the specified type; if the integer expression math_errhandling & MATH_ERRNO is nonzero, whether errno acquires the value ERANGE is implementation-defined; if the integer expression math_errhandling & MATH_ERREXCEPT s nonzero, whether the"underflow" floating-point exception is raised is implementation-defined. 

Implementations that support floating-point arithmetic but do not support subnormal numbers, such as IBM S/360 hex floating-point or nonconforming IEEE-754 implementations that skip subnormals (or support them by flushing them to zero), can return a range error when calling one of the following families of functions with the following arguments:

• fmod((min+subnorm), min)
• remainder((min+subnorm), min)
• remquo((min+subnorm), min, quo)

where min is the minimum value for the corresponding floating point type and subnorm is a subnormal value.

If Annex F is supported and subnormal results are supported, the returned value is exact and a range error cannot occur. The C Standard, F.10.7.1 paragraph 2 [ISO/IEC 9899:2024], specifies the following for the fmod(), remainder(), and remquo() functions:

When subnormal results are supported, the returned value is exact and is independent of the current rounding direction mode.

Annex F, subclause F.10.7.2, paragraph 2, and subclause F.10.7.3, paragraph 2, of the C Standard identify when subnormal results are supported.

Noncompliant Code Example (sqrt())

This noncompliant code example determines the square root of x:

#include <math.h>
 
void func(double x) {
  double result;
  result = sqrt(x);
}

However, this code may produce a domain error if x is negative.

Compliant Solution (sqrt())

Because this function has domain errors but no range errors, bounds checking can be used to prevent domain errors:

#include <math.h>
 
void func(double x) {
  double result;

  if (isless(x, 0.0)) {
    /* Handle domain error */
  }

  result = sqrt(x);
}

Noncompliant Code Example (sinh(), Range Errors)

This noncompliant code example determines the hyperbolic sine of x:

#include <math.h>
 
void func(double x) {
  double result;
  result = sinh(x);
}

This code may produce a range error if x has a very large magnitude.

Compliant Solution (sinh(), Range Errors)

Because this function has no domain errors but may have range errors, the programmer must detect a range error and act accordingly:

#include <math.h>
#include <fenv.h>
#include <errno.h>
 
void func(double x) { 
  double result;
  {
    #pragma STDC FENV_ACCESS ON
    if

...

cosh(x), sinh(x)

Noncompliant Code Example (Range Errors)

This noncompliant code example determines the hyperbolic cosine of x.

double x;
double result;

result = cosh(x);

This code may produce a range error if x has a very large magnitude.

Compliant Solution

Since this function has no domain errors but may have range errors, one must detect a range error and act accordingly.

#include <math.h>
#if defined(math_errhandling) \
  && (math_errhandling & MATH_ERREXCEPT)
#include <fenv.h>
#endif

/* ... */

#if defined(math_errhandling) \
  && (math_errhandling & MATH_ERREXCEPT)
  feclearexcept(FE_ALL_EXCEPT);
#endif
errno = 0;

double x;
double result;

result = sinh(x);

#if !defined(math_errhandling) \
  || (math_errhandling & MATH_ERRNO)
if (errno != 0) {
  /* handle range error */
}
#endif
#if defined(math_errhandling) \
  && (math_errhandling & MATH_ERREXCEPT)
if (fetestexcept(FE_INVALID
               | FE_DIVBYZERO
               | FE_OVERFLOW
               | FE_UNDERFLOW) != 0)
{
  /* handle range error */
}
#endif

...

pow(x, y)

Noncompliant Code Example

The following noncompliant code raises x to the power of y.

double x;
double y;
double result;

result = pow(x, y);

However, this code may produce a domain error if x is negative and y is not an integer, or if x is zero and y is zero. A domain error or range error may occur if x is zero and y is negative, and a range error may occur if the result cannot be represented as a double.

Compliant Solution

Since the pow() function can produce both domain errors and range errors, we must first check that x and y lie within the proper domain. We must also detect if a range error occurs, and act accordingly.

#include <math.h>
#if defined(math_errhandling) \
  && (math_errhandling & MATH_ERREXCEPT)
#include <fenv.h>
#endif

/* ... */

#if defined(math_errhandling) \
  && (math_errhandling & MATH_ERREXCEPT) {
      feclearexcept(FE_ALL_EXCEPT);
#endif
    }
    errno = 0;

/* call the function */

double x;
double y;
double result;

 result = sinh(x);

    if (((x == 0.fmath_errhandling & MATH_ERRNO) && islessequal(y, 0)) || (isless(x, 0))errno != 0) {
  /* handle domain error /* Handle range error */
}

result = pow(x, y);

#if !defined(math_errhandling) \
  ||  } else if ((math_errhandling & MATH_ERRNOERREXCEPT)
if (errno != 0) {
  /* handle range error */
}
#endif
#if defined(math_errhandling) \
  && (math_errhandling & MATH_ERREXCEPT)
if (fetestexcept(FE_INVALID
               | FE_DIVBYZERO
               | FE_OVERFLOW
               | FE_UNDERFLOW) != 0)
{
  /* handle range error */
}
#endif

Risk Assessment

Failure to prevent or detect domain and range errors in math functions may result in unexpected results.

Automated Detection

Fortify SCA Version 5.0 with CERT C Rule Pack can detect violations of this rule.

Related Vulnerabilities

Search for vulnerabilities resulting from the violation of this rule on the CERT website.

Other Languages

This rule appears in the C++ Secure Coding Standard as FLP32-CPP. Prevent or detect domain and range errors in math functions.

References

\[[ISO/IEC 9899:1999|AA. C References#ISO/IEC 9899-1999]\] Section 7.3, "Complex arithmetic <{{complex.h}}>", and Section 7.12, "Mathematics <{{math.h}}>"
\[[MITRE 07|AA. C References#MITRE 07]\] [CWE ID 682|http://cwe.mitre.org/data/definitions/682.html], "Incorrect Calculation"
\[[Plum 85|AA. C References#Plum 85]\] Rule 2-2
\[[Plum 89|AA. C References#Plum 91]\] Topic 2.10, "conv - conversions and overflow"

 &&
               fetestexcept(FE_INVALID | FE_DIVBYZERO |
                            FE_OVERFLOW | FE_UNDERFLOW) != 0) {
      /* Handle range error */
    }
  }
 
  /* Use result... */
}

Noncompliant Code Example (pow())

This noncompliant code example raises x to the power of y:

#include <math.h>
 
void func(double x, double y) {
  double result;
  result = pow(x, y);
}

This code may produce a domain error if x is negative and y is not an integer value or if x is 0 and y is 0. A domain error or pole error may occur if x is 0 and y is negative, and a range error may occur if the result cannot be represented as a double.

Compliant Solution (pow())

Because the pow() function can produce domain errors, pole errors, and range errors, the programmer must first check that x and y lie within the proper domain and do not generate a pole error and then detect whether a range error occurs and act accordingly:

#include <math.h>
#include <fenv.h>
#include <errno.h>
 
void func(double x, double y) {
  double result;

  if (((x == 0.0f) && islessequal(y, 0.0)) || isless(x, 0.0)) {
    /* Handle domain or pole error */
  }

  {
    #pragma STDC FENV_ACCESS ON
    if (math_errhandling & MATH_ERREXCEPT) {
      feclearexcept(FE_ALL_EXCEPT);
    }
    errno = 0;

    result = pow(x, y);
 
    if ((math_errhandling & MATH_ERRNO) && errno != 0) {
      /* Handle range error */
    } else if ((math_errhandling & MATH_ERREXCEPT) &&
               fetestexcept(FE_INVALID | FE_DIVBYZERO |
                            FE_OVERFLOW | FE_UNDERFLOW) != 0) {
      /* Handle range error */
    }
  }

  /* Use result... */
}

Noncompliant Code Example (asin(), Subnormal Number)

This noncompliant code example determines the inverse sine of x:

#include <math.h>
 
void func(float x) {
  float result = asin(x);
  /* ... */
}

Compliant Solution (asin(), Subnormal Number)

Because this function has no domain errors but may have range errors, the programmer must detect a range error and act accordingly:

#include <math.h>
#include <fenv.h>
#include <errno.h>
void func(float x) { 
  float result;

  {
    #pragma STDC FENV_ACCESS ON
    if (math_errhandling & MATH_ERREXCEPT) {
      feclearexcept(FE_ALL_EXCEPT);
    }
    errno = 0;

    result = asin(x);

    if ((math_errhandling & MATH_ERRNO) && errno != 0) {
      /* Handle range error */
    } else if ((math_errhandling & MATH_ERREXCEPT) &&
               fetestexcept(FE_INVALID | FE_DIVBYZERO |
                            FE_OVERFLOW | FE_UNDERFLOW) != 0) {
      /* Handle range error */
    }
  }

  /* Use result... */
}

Risk Assessment

Failure to prevent or detect domain and range errors in math functions may cause unexpected results.

Automated Detection

Related Vulnerabilities

Search for vulnerabilities resulting from the violation of this rule on the CERT website.

Related Guidelines

Key here (explains table format and definitions)

CERT-CWE Mapping Notes

Key here for mapping notes

CWE-391 and FLP32-C

Intersection( CWE-391, FLP32-C) =

• Failure to detect range errors in floating-point calculations

CWE-391 - FLP32-C

• Failure to detect errors in functions besides floating-point calculations

FLP32-C – CWE-391 =

• Failure to detect domain errors in floating-point calculations

CWE-682 and FLP32-C

Independent( INT34-C, FLP32-C, INT33-C) CWE-682 = Union( FLP32-C, list) where list =

• Incorrect calculations that do not involve floating-point range errors

Bibliography

...

Image Added Image Added Image AddedFLP31-C. Do not call functions expecting real values with complex values      05. Floating Point (FLP)       FLP33-C. Convert integers to floating point for floating point operations