STR31-C. Guarantee that storage for strings has sufficient space for character data and the null terminator

Copying data to a buffer that is not large enough to hold that data results in a buffer overflow. Buffer overflows occur frequently when manipulating strings [Seacord 2013]. To prevent such errors, either limit copies through truncation or, preferably, ensure that the destination is of sufficient size to hold the character data to be copied and the null-termination character. (See STR03-C. Do not inadvertently truncate a string.)

When strings live on the heap, this rule is a specific instance of MEM35-C. Allocate sufficient memory for an object.  Because strings are represented as arrays of characters, this rule is related to both ARR30-C. Do not form or use out of bounds pointers or array subscripts and ARR38-C. Guarantee that library functions do not form invalid pointers.

Noncompliant Code Example (Off-by-One Error)

This noncompliant code example demonstrates an off-by-one error [Dowd 2006]. The loop copies data from src to dest. However, the null terminator may incorrectly be written 1 byte past the end of dest because the loop does not account for the null-termination character that must be appended to dest.

#include <stddef.h>
 
enum { ARRAY_SIZE = 32 };
 
void func(void) {
  char dest[ARRAY_SIZE];
  char src[ARRAY_SIZE];
  size_t i;
 
  for (i = 0; src[i] && (i < sizeof(dest)); ++i) {
    dest[i] = src[i];
  }
  dest[i] = '\0';
}

Compliant Solution (Off-by-One Error)

In this compliant solution, the loop termination condition is modified to account for the null-termination character that is appended to dest:

#include <stddef.h>
 
enum { ARRAY_SIZE = 32 };
 
void func(void) {
  char dest[ARRAY_SIZE];
  char src[ARRAY_SIZE];
  size_t i;

  for (i = 0; src[i] && (i < sizeof(dest) - 1); ++i) {
    dest[i] = src[i];
  }
  dest[i] = '\0';
}

Noncompliant Code Example (gets())

The gets() function, which was deprecated in the C99 Technical Corrigendum 3 and removed from C11, is inherently unsafe and should never be used because it provides no way to control how much data is read into a buffer from stdin. This noncompliant code example assumes that gets() will not read more than BUFFER_SIZE - 1 characters from stdin. This is an invalid assumption, and the resulting operation can cause a buffer overflow.

The gets() function reads characters from the stdin into a destination array until end-of-file is encountered or a newline character is read. Any newline character is discarded, and a null character is written immediately after the last character read into the array.

#include <stdio.h>
#define BUFFER_SIZE 1024
 
void func(void) {
  char buf[BUFFER_SIZE];
  if (gets(buf) == NULL) {
    /* Handle error */
  }
}

See also MSC24-C. Do not use deprecated or obsolescent functions.

Compliant Solution (fgets())

The fgets() function reads, at most, one less than a specified number of characters from a stream into an array. This solution is compliant because the number of bytes copied from stdin to buf cannot exceed the allocated memory:

#include <stdio.h>
#include <string.h>
 
enum { BUFFERSIZE = 32 };
 
void func(void) {
  char buf[BUFFERSIZE];
  int ch;

  if (fgets(buf, sizeof(buf), stdin)) {
    /* fgets succeeds; scan for newline character */
    char *p = strchr(buf, '\n');
    if (p) {
      *p = '\0';
    } else {
      /* Newline not found; flush stdin to end of line */
      while (((ch = getchar()) != '\n')
            && !feof(stdin)
            && !ferror(stdin))
        ;
    }
  } else {
    /* fgets failed; handle error */
  }
}

The fgets() function, however, is not a strict replacement for the gets() function because fgets() retains the newline character (if read) and may also return a partial line. It is possible to use fgets() to safely process input lines too long to store in the destination array, but this is not recommended for performance reasons. Consider using one of the following compliant solutions when replacing gets().

Compliant Solution (gets_s(), Annex K)

The gets_s() function reads, at most, one less than the number of characters specified from the stream pointed to by stdin into an array.

Annex K, subclause K.3.5.4.1, of the C Standard [ISO/IEC 9899:2011] states:

No additional characters are read after a new-line character (which is discarded) or after end-of-file. The discarded new-line character does not count towards number of characters read. A null character is written immediately after the last character read into the array.

If end-of-file is encountered and no characters have been read into the destination array, or if a read error occurs during the operation, then the first character in the destination array is set to the null character and the other elements of the array take unspecified values:

#define __STDC_WANT_LIB_EXT1__ 1
#include <stdio.h>
 
enum { BUFFERSIZE = 32 };
 
void func(void) {
  char buf[BUFFERSIZE];

  if (gets_s(buf, sizeof(buf)) == NULL) {
    /* Handle error */
  }
}

Compliant Solution (getline(), POSIX)

The getline() function is similar to the fgets() function but can dynamically allocate memory for the input buffer. If passed a null pointer, getline() dynamically allocates a buffer of sufficient size to hold the input.  If instead, you pass a pointer to dynamically allocated storage that is too small to hold the contents of the string, the getline() function resizes the buffer, using realloc(), rather than truncating the input. If successful, the getline() function returns the number of characters read, which can be used to determine if the input has any null characters before the newline.  The getline() function works only with dynamically allocated buffers.  Allocated memory must be explicitly deallocated by the caller to avoid memory leaks (see MEM31-C. Free dynamically allocated memory when no longer needed.)

#include <stdio.h>
#include <stdlib.h>
#include <string.h>
 
void func(void) {
  int ch;
  size_t buffer_size = 32;
  char *buffer = malloc(buffer_size);
 
  if (!buffer) {
    /* Handle error */
    return;
  }

  if ((ssize_t size = getline(&buffer, &buffer_size, stdin))
        == -1) {
    /* Handle error */
  } else {
    char *p = strchr(buffer, '\n');
    if (p) {
      *p = '\0';
    } else {
      /* Newline not found; flush stdin to end of line */
      while (((ch = getchar()) != '\n')
	     && !feof(stdin)
	     && !ferror(stdin))
        ;
    }
  }
  free (buffer);
}

Note that the getline() function uses an in-band error indicator, in violation of the recommendation ERR02-C. Avoid in-band error indicators.

Noncompliant Code Example (getchar())

This noncompliant code example uses the getchar() function to read one character at a time from stdin instead of reading the entire line at once. The stdin stream is read until end-of-file is encountered or a newline character is read. Any newline character is discarded, and a null character is written immediately after the last character read into the array. Similar to the previous example, there are no guarantees that this code will not result in a buffer overflow.

#include <stdio.h>
 
enum { BUFFERSIZE = 32 };
 
void func(void) {
  char buf[BUFFERSIZE];
  char *p;
  int ch;
  p = buf;
  while (((ch = getchar()) != '\n')
         && !feof(stdin)
         && !ferror(stdin)) {
    *p++ = ch;
  }
  *p++ = 0;
}

Compliant Solution (getchar())

In this compliant solution, characters are no longer copied to buf once index == BUFFERSIZE - 1, leaving room to null-terminate the string. The loop continues to read characters until the end of the line, the end of the file, or an error is encountered.

#include <stdio.h>
 
enum { BUFFERSIZE = 32 };
void func(void) {
  unsigned char buf[BUFFERSIZE];
  int ch;
  int index = 0;
  int chars_read = 0;
 
  while (((ch = getchar()) != '\n')
          && !feof(stdin)
          && !ferror(stderr)) {
    if (index < sizeof(buf) - 1) {
      buf[index++] = (unsigned char)ch;
    }
    chars_read++;
  }
  buf[index] = '\0';  /* Terminate NTBS */
  if (feof(stdin)) {
    /* Handle EOF */
  }
  if (ferror(stdin)) {
    /* Handle error */
  }
  if (chars_read > index) {
    /* Handle truncation */
  }
}

After the loop ends, if feof(stdin) != 0, the loop has read through to the end of the file without encountering a newline character. Similarly, if ferror(stdin) != 0, a read error occurred before the loop encountered a newline character, and if chars_read > index, the input string has been truncated. FIO34-C. Distinguish between characters read from a file and EOF or WEOF is also applied in this solution.

Reading one character at a time provides more flexibility in controlling behavior without additional performance overhead.

The following test for the while loop is normally sufficient:

while (((ch = getchar()) != '\n') && !feof(stdin) && !ferror(stdin))

Noncompliant Code Example (scanf())

In this noncompliant example, the call to fscanf() can result in a write outside the character array buf.

#include <stdio.h>
 
void get_data(void) {
  enum { BUF_LENGTH = 1024 };
  char buf[BUF_LENGTH];
  fscanf(stdin, "%s", buf); */
  /* rest of function
}

Compliant Solution (scanf())

In this compliant solution, the call to fscanf() is constrained not to overflow buf.

#include <stdio.h>
 
void get_data(void) {
  enum { BUF_LENGTH = 1024 };
  char buf[BUF_LENGTH];
  fscanf(stdin, "%1024s", buf);
  /* rest of function */
}

Noncompliant Code Example (argv)

Arguments read from the command line are stored in process memory. The function main(), called at program startup, is typically declared as follows when the program accepts command-line arguments:

int main(int argc, char *argv[]) { /* ... */ }

Command-line arguments are passed to main() as pointers to strings in the array members argv[0] through argv[argc - 1]. If the value of argc is greater than 0, the string pointed to by argv[0] is, by convention, the program name. If the value of argc is greater than 1, the strings referenced by argv[1] through argv[argc - 1] are the program arguments.

Vulnerabilities can occur when inadequate space is allocated to copy a command-line argument or other program input. In this noncompliant code example, the contents of argv[0] can be manipulated by an attacker to cause a buffer overflow:

#include <string.h>
 
int main(int argc, char *argv[]) {
  char prog_name[128];
  strcpy(prog_name, argv[0]);
 
  return 0;
}

Compliant Solution (argv)

The strlen() function can be used to determine the length of the strings referenced by argv[0] through argv[argc - 1] so that adequate memory can be dynamically allocated. Note that care must be taken to avoid assuming that argv[0] is non-null.

#include <stdlib.h>
#include <string.h>
 
int main(int argc, char *argv[]) {
  /* Be prepared for argv[0] to be null */
  const char *const name = (argc && argv[0]) ? argv[0] : "";
  char *prog_name = (char *)malloc(strlen(name) + 1);
  if (prog_name != NULL) {
    strcpy(prog_name, name);
  } else {
    /* Handle error */
  }
  free(prog_name);
  return 0;
}

Remember to add a byte to accommodate the null-termination character.

Compliant Solution (Annex K, argv)

The strcpy_s() function provides additional safeguards, including accepting the size of the destination buffer as an additional argument. (See STR07-C. Use the bounds-checking interfaces for remediation of existing string manipulation code.) Do not assume that argv[0] is non-null.

#define __STDC_WANT_LIB_EXT1__ 1
#include <stdlib.h>
#include <string.h>
 
int main(int argc, char *argv[]) {
  /* Be prepared for argv[0] to be null */
  const char *const name = (argc && argv[0]) ? argv[0] : "";

  char *prog_name;
  size_t prog_size;

  prog_size = strlen(name) + 1;
  prog_name = (char *)malloc(prog_size);

  if (prog_name != NULL) {
    if (strcpy_s(prog_name, prog_size, name)) {
      /* Handle  error */
    }
  } else {
    /* Handle error */
  }
  /* ... */
  free(prog_name);
  return 0;
}

The strcpy_s() function can be used to copy data to or from dynamically allocated memory or a statically allocated array. If insufficient space is available, strcpy_s() returns an error.

Compliant Solution (argv)

If an argument is not going to be modified or concatenated, there is no reason to make a copy of the string. Not copying a string is the best way to prevent a buffer overflow and is also the most efficient solution. Care must be taken to avoid assuming that argv[0] is non-null.

int main(int argc, char *argv[]) {
  /* Be prepared for argv[0] to be null */
  const char * const prog_name = (argc && argv[0]) ?
                                   argv[0] : "";
  /* ... */
  return 0;
}

Noncompliant Code Example (getenv())

The getenv() function searches the environment list, provided by the host environment, for a string that matches the string pointed to by name. The set of environment names and the method for altering the environment list are implementation-defined. Environment variables can be arbitrarily large, and copying them into fixed-length arrays without first determining the size and allocating adequate storage can result in a buffer overflow.

#include <stdlib.h>
#include <string.h>
 
void func(void) {
  char buff[256];
  char *editor = getenv("EDITOR");
  if (editor == NULL) {
    /* EDITOR environment variable not set */
  } else {
    strcpy(buff, editor);
  }
}

Compliant Solution (getenv())

Environmental variables are loaded into process memory when the program is loaded. As a result, the length of these strings can be determined by calling the strlen() function, and the resulting length can be used to allocate adequate dynamic memory:

#include <stdlib.h>
#include <string.h>
 
void func(void) {
  char *buff;
  char *editor = getenv("EDITOR");
  if (editor == NULL) {
    /* EDITOR environment variable not set */
  } else {
    size_t len = strlen(editor) + 1;
    buff = (char *)malloc(len);
    if (buff == NULL) {
      /* Handle error */
    }  
    memcpy(buff, editor, len);
    free(buff);
  }
}

Noncompliant Code Example (sprintf())

In this example, name refers to an external string; it could have originated from user input, from the file system, or from the network. The program constructs a file name from the string in preparation for opening the file.

#include <stdio.h>
 
void func(const char *name) {
  char filename[128];
  sprintf(filename, "%s.txt", name);
}

However, because the sprintf() function makes no guarantees regarding the length of the generated string, a sufficiently long string in name could generate a buffer overflow.

Compliant Solution (sprintf())

The buffer overflow can be prevented by adding a precision to the %s conversion specification. If the precision is specified, no more than that many bytes are written. The precision 123 in this compliant solution ensures that filename can contain the first 123 characters of name, the .txt extension, and the null terminator.

#include <stdio.h>
 
void func(const char *name) {
  char filename[128];
  sprintf(filename, "%.123s.txt", name);
}

Compliant Solution (snprintf())

A more general solution is to use the snprintf() function:

#include <stdio.h>
 
void func(const char *name) {
  char filename[128];
  snprintf(filename, sizeof(filename), "%s.txt", name);
}

Risk Assessment

Copying string data to a buffer that is too small to hold that data results in a buffer overflow. Attackers can exploit this condition to execute arbitrary code with the permissions of the vulnerable process.

Automated Detection

Related Vulnerabilities

CVE-2009-1252 results from a violation of this rule. The Network Time Protocol daemon (NTPd), before versions 4.2.4p7 and 4.2.5p74, contained calls to sprintf that allow an attacker to execute arbitrary code by overflowing a character array [xorl 2009].

CVE-2009-0587 results from a violation of this rule. Before version 2.24.5, Evolution Data Server performed unchecked arithmetic operations on the length of a user-input string and used the value to allocate space for a new buffer. An attacker could thereby execute arbitrary code by inputting a long string, resulting in incorrect allocation and buffer overflow [xorl 2009].

Search for additional vulnerabilities resulting from the violation of this rule on the CERT website.

Related Guidelines

Bibliography