SIG30-C. Call only asynchronous-safe functions within signal handlers

Call only asynchronous-safe functions within signal handlers. For strictly conforming programs, only the C standard library functions abort(), _Exit(), quick_exit(), and signal() can be called from within a signal handler. 

Subclause 7.14.1.1, paragraph 5, of the C Standard [ISO/IEC 9899:2011] states that if the signal occurs other than as the result of calling the abort() or raise() function, the behavior is undefined if

...the signal handler calls any function in the standard library other than the abort function, the _Exit function, the quick_exit function, or the signal function with the first argument equal to the signal number corresponding to the signal that caused the invocation of the handler.

Many systems define an implementation-specific list of asynchronous-safe functions. These functions can also be called within a signal handler. This restriction applies to library functions as well as application-defined functions.

According to Subclause 7.14.1.1 of the C Rationale [C99 Rationale 2003],

When a signal occurs, the normal flow of control of a program is interrupted. If a signal occurs that is being trapped by a signal handler, that handler is invoked. When it is finished, execution continues at the point at which the signal occurred. This arrangement can cause problems if the signal handler invokes a library function that was being executed at the time of the signal.

In general, it is not safe to invoke I/O functions from within signal handlers. Make sure a function is included in the list of system's asynchronous-safe functions for all implementations your code will run on before using them in signal handlers.

Noncompliant Code Example

In this noncompliant example, the C standard library functions fprintf() and free() are called from the signal handler via the function log_message(). Neither function is asynchronous-safe.

#include <signal.h>
#include <stdio.h>
#include <stdlib.h>

enum { MAXLINE = 1024 };
char *info = NULL;

void log_message(void) {
  fprintf(stderr, info);
}

void handler(int signum) {
  log_message();
  free(info);
  info = NULL;
}

int main(void) {
  if (signal(SIGINT, handler) == SIG_ERR) {
    /* Handle error */
  }
  info = (char *)malloc(MAXLINE);
  if (info == NULL) {
    /* Handle Error */
  }

  while (1) {
    /* Main loop program code */

    log_message();

    /* More program code */
  }
  return 0;
}

Compliant Solution

Signal handlers should be as concise as possible—ideally, unconditionally setting a flag and returning. This compliant solution sets a flag of type volatile sig_atomic_t and returns; the log_message() and free() functions are called directly from main():

#include <signal.h>
#include <stdio.h>
#include <stdlib.h>

enum { MAXLINE = 1024 };
volatile sig_atomic_t eflag = 0;
char *info = NULL;

void log_message(void) {
  fprintf(stderr, info);
}

void handler(int signum) {
  eflag = 1;
}

int main(void) {
  if (signal(SIGINT, handler) == SIG_ERR) {
    /* Handle error */
  }
  info = (char *)malloc(MAXLINE);
  if (info == NULL) {
    /* Handle error */
  }

  while (!eflag) {
    /* Main loop program code */

    log_message();

    /* More program code */
  }

  log_message();
  free(info);
  info = NULL;

  return 0;
}

Noncompliant Code Example (longjmp())

Invoking the longjmp() function from within a signal handler can lead to undefined behavior if it results in the invocation of any non-asynchronous-safe functions, likely compromising the integrity of the program. Consequently, neither longjmp() nor the POSIX siglongjmp() should ever be called from within a signal handler.

This noncompliant code example is similar to a vulnerability in an old version of Sendmail [VU #834865]. The intent is to execute code in a main() loop, which also logs some data. Upon receiving a SIGINT, the program transfers out of the loop, logs the error, and terminates.

However, an attacker can exploit this noncompliant code example by generating a SIGINT just before the second if statement in log_message(). The result is that longjmp() transfers control back to main(), where log_message() is called again. However, the first if statement would not be executed this time (because buf is not set to NULL as a result of the interrupt), and the program would write to the invalid memory location referenced by buf0.

#include <setjmp.h>
#include <signal.h>
#include <stdlib.h>

enum { MAXLINE = 1024 };
static jmp_buf env;

void handler(int signum) {
  longjmp(env, 1);
}

void log_message(char *info1, char *info2) {
  static char *buf = NULL;
  static size_t bufsize;
  char buf0[MAXLINE];

  if (buf == NULL) {
    buf = buf0;
    bufsize = sizeof(buf0);
  }

  /*
   * Try to fit a message into buf, else reallocate
   * it on the heap and then log the message.
   */

  /*** VULNERABILITY IF SIGINT RAISED HERE ***/

  if (buf == buf0) {
    buf = NULL;
  }
}

int main(void) {
  if (signal(SIGINT, handler) == SIG_ERR) {
    /* Handle error */
  }
  char *info1;
  char *info2;

  /* info1 and info2 are set by user input here */

  if (setjmp(env) == 0) {
    while (1) {
      /* Main loop program code */
      log_message(info1, info2);
      /* More program code */
    }
  } else {
    log_message(info1, info2);
  }

  return 0;
}

Compliant Solution

In this compliant solution, the call to longjmp() is removed; the signal handler sets an error flag of type volatile sig_atomic_t instead:

#include <signal.h>
#include <stdlib.h>

enum { MAXLINE = 1024 };
volatile sig_atomic_t eflag = 0;

void handler(int signum) {
  eflag = 1;
}

void log_message(char *info1, char *info2) {
  static char *buf = NULL;
  static size_t bufsize;
  char buf0[MAXLINE];

  if (buf == NULL) {
    buf = buf0;
    bufsize = sizeof(buf0);
  }

  /*
   * Try to fit a message into buf, else reallocate
   * it on the heap and then log the message.
   */
  if (buf == buf0) {
    buf = NULL;
  }
}

int main(void) {
  if (signal(SIGINT, handler) == SIG_ERR) {
    /* Handle error */
  }
  char *info1;
  char *info2;

  /* info1 and info2 are set by user input here */

  while (!eflag) {
    /* Main loop program code */
    log_message(info1, info2);
    /* More program code */
  }

  log_message(info1, info2);

  return 0;
}

Noncompliant Code Example (raise())

In this noncompliant code example, the int_handler() function is used to carry out tasks specific to SIGINT and then raises SIGTERM. However, there is a nested call to the raise() function, which results in undefined behavior.

#include <signal.h>
 
void term_handler(int signum) {
  /* SIGTERM handling specific */
}
 
void int_handler(int signum) {
  /* SIGINT handling specific */
  if (raise(SIGTERM) != 0) {
    /* Handle error */
  }
}
 
int main(void) {
  if (signal(SIGTERM, term_handler) == SIG_ERR) {
    /* Handle error */
  }
  if (signal(SIGINT, int_handler) == SIG_ERR) {
    /* Handle error */
  }
 
  /* Program code */
  if (raise(SIGINT) != 0) {
    /* Handle error */
  }
  /* More code */
 
  return EXIT_SUCCESS;
}

Compliant Solution

In this compliant solution, int_handler() invokes term_handler() instead of raising SIGTERM.  

#include <signal.h>
 
void term_handler(int signum) {
  /* SIGTERM handling specific */
}
 
void int_handler(int signum) {
  /* SIGINT handling specific */
  /* Pass control to the term handler */
  term_handler(SIGTERM);
}
 
int main(void) {
  if (signal(SIGTERM, term_handler) == SIG_ERR) {
    /* Handle error */
  }
  if (signal(SIGINT, int_handler) == SIG_ERR) {
    /* Handle error */
  }
 
  /* Program code */
  if (raise(SIGINT) != 0) {
    /* Handle error */
  }
  /* More code */
 
  return EXIT_SUCCESS;
}

Implementation Details

POSIX

The following table from the POSIX standard [IEEE Std 1003.1:2013] defines a set of functions that are asynchronous-signal-safe. Applications may invoke these functions, without restriction, from a signal handler.

Asynchronous-Signal-Safe Functions 

All functions not listed in this table are considered to be unsafe with respect to signals. In the presence of signals, all POSIX functions behave as defined when called from or interrupted by a signal handler, with a single exception: when a signal interrupts an unsafe function and the signal handler calls an unsafe function, the behavior is undefined.

Subclause 7.14.1.1, paragraph 4, of the C Standard [ISO/IEC 9899:2011] states:

  If the signal occurs as the result of calling the abort or raise function, the signal handler shall not call the raise function.

 However, in the description of signal(), POSIX states:

This restriction does not apply to POSIX applications, as POSIX.1-2008 requires raise() to be async-signal-safe

See also undefined behavior 131. 

OpenBSD

The OpenBSD signal() manual page lists a few additional functions that are asynchronous-safe in OpenBSD but "probably not on other systems," including snprintf(), vsnprintf(), and syslog_r() (but only when the syslog_data struct is initialized as a local variable).

Risk Assessment

Invoking functions that are not asynchronous-safe from within a signal handler may result in privilege escalation and other attacks.

Automated Detection

Related Vulnerabilities

For an overview of software vulnerabilities resulting from improper signal handling, see Zalewski's paper [Zalewski 2001] on understanding, exploiting, and preventing signal-handling-related vulnerabilities. VU #834865 describes a vulnerability resulting from a violation of this rule.

Another notable case where using the longjmp() function in a signal handler caused a serious vulnerability is wu-ftpd 2.4 [Greenman 1997]. The effective user ID is set to 0 in one signal handler. If a second signal interrupts the first, a call is made to longjmp(), returning the program to the main thread but without lowering the user's privileges. These escalated privileges can be used for further exploitation.

Search for vulnerabilities resulting from the violation of this rule on the CERT website.

Related Guidelines

Bibliography